Banner Archives - Page 11 of 14 - Full Octane Garage | Full Octane Garage

Category Archives: Banner

Engine and Trans mocked up in Project 50 Five Window

April 20, 2016 1950 Chevy Truck, Banner

We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project is doing some measuring and adjusting on the LS engine plates, I think it is too far forward.

Corvette Montage

April 12, 2016 Banner, C1 Corvette, C2 Corvette, Corvette

Project 5 Window Body Update

April 7, 2016 1950 Chevy Truck, Banner

We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix a few dings but the rest looks nice. After a few hours of blowing sand out of the cab we got it in Epoxy Primer.

Project 5 Window Chassis Update

April 7, 2016 1950 Chevy Truck, Banner

We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and we converted the Heidts front end to tubular control arms. We blasted everything, painted and now are back to rolling chassis status.

1964 Chevy Truck with a Cummins Diesel

March 22, 2016 Banner, Just Cool

This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel.

Removing the CAB from the latest 1950 Chevy truck project

March 22, 2016 1950 Chevy Truck, Banner

A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project.

Fresh 6.0 Aluminum and a Fresh 5.3 Arrived

March 16, 2016 1950 Chevy Truck, 1957 GMC Project LS-Z57, Banner, LS Stuff

I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 so when he offered the 5.3 for sale I bought it. This motor will be installed in the 1950 Five Window Chevy truck.

Another friend had a fresh LS2 6.0 aluminum and he was upgrading to a LS7 so when his motor became available I bought it to go in my 1957 GMC project.

The Welder & Plasma Cutter Arrived

March 9, 2016 Banner, Metal Work

The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up.

88 Corvette Engine Removal

February 28, 2016 1957 GMC Project LS-Z57, Banner

We made more progress on tearing down the 88 Corvette donor car.

This top was cut off and sold yesterday and this was the progression of the engine removal today. The engine is finally out. Thanks to my friend Allen Pezo for some needed help!

Tesla Model X vs Model S P90D Ludicrous Husband vs Wife Drag Racing 1/4 Mile Showdown

February 17, 2016 Banner, Just Cool, Test Drives

This was interesting.

Thanks to Drag Times for sharing!

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- New Front SuspensionTest Fit
  
  We did a test fit on the new front suspension test fit tonight. Over all it went in very easy, have a few items to work Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- A Day at the Porsche Driving Experience
  
  The Full Octane Garage was invited down to Porsche North American Headquarters in Atlanta by Hagerty’s for a special meet and greet and to check out Read More »
- Pink Floyd now has a new color!
  
  After several weeks of prep work we finally shot the color and clear on Pink Floyd today. The project is getting exciting now that the car Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- 1950 Chevy Truck Paint Progress
  
  We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- 70 Exotic Cars and 1 Great Cause!
  
  16The Full Octane Garage participated in the 2018 Team Annie Rose Leukemia Foundation Poker Run with an amazing collection of over 70 exotic cars. Read More »
- Corvette Montage
  
  Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- 1963 Corvette Split Window (Project Second Chance)
  
  Well it seems I am a gluten for punishment, I am back for my 4th build since 2012. At the end of each build I keep Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- ICT Billet High Mount Narrow Bay AC Bracket Review (LS1/LS2/LS3 or Vortec 5.3) Part #551352-3
  
  We had bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine but unfortunately I did not measure where my Read More »
- Installing Heating and Cooling in my Garage!
  
  FULL OCTANE your GARAGE! In this video we will discuss the various options for heating and cooling your garage and then a more detailed discussion of Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- you know you are a Car Guy if… Episode 1
  
  1st in a series of short videos that define the Real “Car Guy”! Let us know what you think in the comments! Read More »
- Human Car Sounds Guy – Australia’s Got Talent
  
  This is pretty funny! Read More »
- Pink Floyd’s New Jorney
  
  Pink Floyd begins it’s New Journey from Texas to Brentwood Tn. We are looking forward to the arrival. Read More »
- C2 ZR1 ’64 Corvette Stingray
  
  This is a custom C2 Corvette called C2 ZR1 with the new aluminum block LS9, supercharged ZR1 powerplant. Thanks to Miatamaniacmike for this video. Read More »
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- 2014 Corvette Delivery Day
  
  [nggallery id=96] Read More »
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- Disk Brake Squeal Fix – The Easy Way
  
  This is a short video on how to reduce brake noise from disk brakes. We used a product called “Disc Brake Quiet” Please support our channel Read More »
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »