Project Pink Floyd – The Doors Are On! | Full Octane Garage

Project Pink Floyd – The Doors Are On!

August 27, 2012 C1 Corvette, Project Pink Floyd

I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes 🙂

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »
- Side Effects of Ethanol
  
  We know ethanol does some strange stuff to fuel systems but we did not think this is one of the expected side effects 🙂 Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Floyd – NOW IN PRIMER
  
  We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More »
- Floyd – Week 7 Progress Update
  
  Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
  
  This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- Pink Floyd’s New Jorney
  
  Pink Floyd begins it’s New Journey from Texas to Brentwood Tn. We are looking forward to the arrival. Read More »
- C7 is on order :)
  
  The new 2014 C7 is on order and will arrive soon! Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- Speedway Motors Front Disk Brake Kit Install & Review
  
  We decided to try out the Speedway Motors Front Disk Brake Kit so we put together an installation & Review video. This is their part number Read More »
- Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
  
  A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More »
- 1 Year with the GMC Denali Sierra 1500, An Owner’s Perspective
  
  Well it has been 1 year and 36K miles since we bought the 2017 GMC Denali Sierra 1500. In this video, we will review the good, Read More »
- A Mini Monster Truck Catching Nice Air
  
  A Mini Monster Truck Catching Nice Air! Read More »
- 1950 Chevy Truck F-Body Manifold Modification For LS
  
  It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Loaded and ready for Corvettes at Carlisle
  
  The trailer arrived and it looks great. We now have the car loaded ready for the first road trip to Corvettes at Carlisle 🙂 [nggallery id=87] Read More »

August 2026

M T W T F S S

« Dec

1 2

3 4 5 6 7 8 9

10 11 12 13 14 15 16

17 18 19 20 21 22 23

24 25 26 27 28 29 30

31