Jaguar XKRS Archives - Full Octane Garage | Full Octane Garage

Tag Archives: Jaguar XKRS

How To Park A Jaguar XKRS

October 24, 2016 Banner, Funny, Sarcasm, Stupid Octane Tricks

How To Park A Jaguar XKRS (with no help from your friends)

Read More

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Before
  
  In 2012 I decided I wanted to restore a C1 corvette for my 50th birthday so my journey began 🙂 I looked on craigs list, ebay Read More »
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Human Car Sounds Guy – Australia’s Got Talent
  
  This is pretty funny! Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- A Small Bit Of Bad News :( (but it is not too bad)
  
  While cleaning out the rocker area I uncovered some severely rusted metal under the fiberglass, who would have known there would be metal in a fiberglass Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Project 63 – Interior Progress Update 5/13/13
  
  I am finally making good progress on the interior. I was able to get the Second Skin heat mat down and I got the whole rear compartment other Read More »
- New Wheels and Tires Arrived
  
  The new wheels and tires arrived today, put them on for a test fit. Read More »
- Pink Floyd Day 16 (FUN WITH STRIPPER)
  
  OK, get your mind out of the gutter, I meant paint stripper and not real strippers 🙂 I took today to work with chemical stripper to Read More »
- Why is the LS so good?
  
  Thanks to /Drive for this video. Read More »
- TOP SECRET Lane Motor Museum Tour (Behind the scenes)
  
  TOP SECRET Lane Motor Museum Tour (Behind the scenes + Basement Tour including the Nissan Heritage Collection). OK, not so TOP SECRET but the basement and Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- Funniest boat launch ever!
  
  You have to watch this the whole way though but it is funny! Read More »
- 50 Chevy Truck Body Progress
  
  We finally got back to work on the 1950 Chevy 5 window truck project this week. Today Dennis spent a bunch of time prepping the majority Read More »
- 2015 SEMA Battle Of The Builders
  
  Full Octane Garage was very excited to have our 1956 Corvette Resto-Mod (Project LS-56) accepted in the 2015 SEMA Battle Of The Builders competition. It was Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN
  
  MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN COURTESY OF VELOCITY MOTORCARS! Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Project Pink Floyd Day 15
  
  More fun with Baking Soda 🙂 We are doing a DIY soda blasting project using an Eastwood Dual Blast unit. This project took about 600 lbs Read More »

November 2018

M T W T F S S

« Sep

1 2 3 4

5 6 7 8 9 10 11

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29 30