DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool

December 22, 2016 1950 Chevy Truck, Banner, How To, Product Review

DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool (Item #25304) for the first time and have a detailed review.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »
- Chasing a McLaren 720S on the Dragon, 4K BTR 2018
  
  The Full Octane Garage took our classic Porsche 911 996 Cabriolet along with 11 exotic cars to drive the back roads of North Carolina with the Read More »
- How To Park A Jaguar XKRS
  
  How To Park A Jaguar XKRS (with no help from your friends) Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- 10 Car Logos You Probably Never Knew The Meaning Of!
  
  Thanks to Car Throttle for this clip. Read More »
- Pink Floyd Week 19 Progress (Color is looking GREAT!)
  
  Week 19 continues to bring a lot of progress. We started color sanding the body and it is looking GREAT so far! We have been working hard putting Read More »
- How Much To Insure A New 2019 Ford GT ($500K Value)
  
  You now have an extra $500,000 and want to buy a 2019 Ford GT, you now ask how much is my insurance going to cost??? When Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- Ardmore TN Car Show 2016
  
  The Full Octane Garage attended the Armore Car Show in Ardmore, TN. Friendly people, beautiful cars and Mildreds for lunch! Thanks for having us , Ardmore! Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- Installing Heating and Cooling in my Garage!
  
  FULL OCTANE your GARAGE! In this video we will discuss the various options for heating and cooling your garage and then a more detailed discussion of Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »
- Pink Floyd Day 4
  
  It was a short night tonight. We were able to remove the parking brake, hood release and dash cluster. I also put some stuff on Craig Read More »
- Hank Hill proves WD40 is the answer to all problems
  
  Read More »
- A Mini Monster Truck Catching Nice Air
  
  A Mini Monster Truck Catching Nice Air! Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »