Categories
-
Facebook
Archives
-
Recent Posts
-
Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More » -
Engineering Flow Chart
I found this on Facebook and it was too cool to not post! Read More » -
Why is the LS so good?
Thanks to /Drive for this video. Read More » -
Human Car Sounds Guy – Australia’s Got Talent
This is pretty funny! Read More » -
Comedians in Cars Getting Coffee with a 63 Split Window and President Obama
This turned out to be much funnier than I had anticipated. Awesome 63 Split Window Corvette!!! Thanks to Comedians In Cars Getting Coffee for another great Read More » -
First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More » -
Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More » -
Removing and Storing the Freedom Roof Panels for the Jeep Wrangler Unlimited
Today the Full Octane Garage will cover, with the help of our good friend Elvis from the Golden Drive and our fellow Jeep enthusiast, Zlatko, how Read More » -
2017 Boca Raton Concours
We took some pictures of our visit at the 2017 Boca Raton Concours. Read More » -
ICT Billet A/C Bracket Install & Review 551494-3
We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More » -
Initial Engine Start Up
Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More » -
Tim Allen’s Car Collection of Authentic American Made Motors – GQ’s Car Collectors – Los Angeles
Tim Allen is such a funny guy and it is nice to see a fellow car guy with such a cool collection. Read More » -
The New 1988 Corvette Donor Car Has Arrived
If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More » -
Black Vinyl Wrap for the new Corvette
I decided to vinyl wrap the center section of the top and my first attempt was in a matt carbon fiber look. I tried it for a Read More » -
Engine and Trans mocked up in Project 50 Five Window
We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More » -
Project 57 Has Arrived
It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More » -
DIY Porsche Cayenne Key FOB Battery Replacement
A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More » -
Insite from Jessie James
 Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More » -
SOLD – 2007 Corvette Z06
For sale is a VERY CLEAN 2007 Corvette Z06 Loaded 3LT package, Victory Red, two tone red/black seats, memory seating, heated seats, painted rear spoiler, 505 Read More » -
PupProtector Car Seat Cover Review
At the Full Octane Garage, when we use a product and find that it may benefit our viewers, we like review it after running it thru Read More » -
Floyd Gets a New Power Plant and Suspension
We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More » -
Side Effects of Ethanol
We know ethanol does some strange stuff to fuel systems but we did not think this is one of the expected side effects 🙂 Read More » -
Project Pink Floyd – The Doors Are On!
I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More » -
Project 5 Window Chassis Update
We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More » -
Putting RUST 911 to the test!
As part of our product testing we decided to put RUST 911 to the test and here is our Rust 911 review! Read More » -
The Redneck Spin Chair
This would be a crazy ride, not sure I could handle it! Read More » -
New 1957 GMC Shop Truck Project
We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More » -
Frame Work Continues
We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More » -
Aston Martin Snow Test
This is crazy, an Aston Martin Snow Test. Read More » -
Pink Floyd Day 11
On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
-
July 2024 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31