Initial Engine Start Up

October 30, 2012 Uncategorized

Here are a couple of clips of the initial engine start up.

1st Attempt to Start Disaster, starter stuck engaged 🙂

2nd Attempt at Engine Start Up

Cam Break In

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- Project 63 got some color today!
  
  Project 63 got some color today! Pictures of Dennis doing the final shooting. Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- Initial Engine Start Up
  
  Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- Floyd – Week 7 Progress Update
  
  Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More »
- 1963 Corvette Split Window (Project Second Chance)
  
  Well it seems I am a gluten for punishment, I am back for my 4th build since 2012. At the end of each build I keep Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Human Car Sounds Guy – Australia’s Got Talent
  
  This is pretty funny! Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- LOOK, it’s an engine! Pink Floyd now has an Engine and 5 speed
  
  Pink Floyd finally got an engine and 5 speed installed today. It will not belong before it gets a body! [nggallery id=56] Read More »
- Pink Floyd – Week 17 progress
  
  Week 17 has been busy. We started putting the frame back together. The new front suspension is now complete, the brake lines are plumbed and we are close Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- 1950 Chevy Truck Paint Progress
  
  We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More »
- 88 Corvette Engine Removal
  
  We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- 2300 Miles in a Jaguar with no Top, One Man’s Epic Journey
  
  Our friend Paul took the time to sit down with the Full Octane Garage and share his incredible 2300 mile journey to collect a replica of Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Pink Floyd Day 1
  
  Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- Project 63 gets a some new skin and bling
  
  Well while we had the transmission out for a 5 speed sway we decided to go ahead and rebuild the numbers matching 327. Unfortunately that is adding 4 weeks to Read More »
- 1 Year with the GMC Denali Sierra 1500, An Owner’s Perspective
  
  Well it has been 1 year and 36K miles since we bought the 2017 GMC Denali Sierra 1500. In this video, we will review the good, Read More »
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- GMC Sierra / Denali Automatic High Beams Explained
  
  Well, just when you think you knew everything… someone shows you something new. In this video FoG explains the function of the GMC automatic high beams. Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »