Categories
-
Facebook
Archives
-
Recent Posts
-
Very Cool Right Hand Drive 58 Corvette
This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More » -
Floyd – Week 7 Progress Update
Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More » -
First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More » -
Project LS-56 has begun – 56 Corvette
Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More » -
1950 Chevy Five Window Progress Update 03/27/2017
We are making a little more progress on the 50. We got the LS harness all installed and mounted the computer under the passenger seat. We Read More » -
Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More » -
Very cool Camper
This is a very cool camper. Read More » -
1950 Chevy Truck Paint Progress
We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More » -
2015 Audi S5 Cabriolet Review An Owner’s Perspective
2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More » -
Pink Floyd Day 4
It was a short night tonight. We were able to remove the parking brake, hood release and dash cluster. I also put some stuff on Craig Read More » -
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Project 63 – 4/21 Progress
We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More » -
Pink Floyd Day 1
Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More » -
GMC/Chevy Hide Or Reveal Radio Favorites (Explained)
This video will show you how to Hide Or Reveal your radio favorites for the GM Intellilink Infotainment System. Read More » -
Project 63 is ALIVE
Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More » -
Pink Floyd – Week 17 progress
Week 17 has been busy. We started putting the frame back together. The new front suspension is now complete, the brake lines are plumbed and we are close Read More » -
Runaway Peterbuilt
This is pretty Scary Stuff Read More » -
Pink Floyd Day 7
Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More » -
WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More » -
Nashville Cars And Coffee 12-17-16
This is a preview of a few of the cars that braved the wet roads and attended Nashville Cars And Coffee on 12-17-16. Read More » -
2015 SEMA Battle Of The Builders
Full Octane Garage was very excited to have our 1956 Corvette Resto-Mod (Project LS-56) accepted in the 2015 SEMA Battle Of The Builders competition. It was Read More » -
1955 MG TF New Top Project
After 2 years of having a new rag top in the box we finally got around to installing the new top. It looks so much nicer Read More » -
Hank Hill proves WD40 is the answer to all problems
-
2017 Boca Raton Concours
We took some pictures of our visit at the 2017 Boca Raton Concours. Read More » -
Full Octane Garage Now Offers Corvette Replacement Chassis
We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More » -
Chassis Work Begins (Week 13)
Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More » -
Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More » -
Pavers going down in dirty space (on a budget)
Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More » -
New 1957 GMC Shop Truck Project
We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More » -
Pink Floyd Week 26
We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
-
January 2023 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31