Services

Custom Build Consulting

If you have a need for any of these services we would love to talk about your project. Please call us at 615-669-4438 or fill out the form below.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- How Much To Insure A New 2019 Ford GT ($500K Value)
  
  You now have an extra $500,000 and want to buy a 2019 Ford GT, you now ask how much is my insurance going to cost??? When Read More »
- 1955 MG TF is complete
  
  The 1955 MG TF restoration is now complete. [nggallery id=12] Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- you know you are a Car Guy if… Episode 1
  
  1st in a series of short videos that define the Real “Car Guy”! Let us know what you think in the comments! Read More »
- Eastwood Brake Tube Flaring Tool Review (Item #25304)
  
  This is a non-sponsored review of the Eastwood Brake Tube Flaring Tool (Item #25304). This is the firs time we used the tool and it is Read More »
- GMC Sierra / Denali Automatic High Beams Explained
  
  Well, just when you think you knew everything… someone shows you something new. In this video FoG explains the function of the GMC automatic high beams. Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- A Week with the 2017 Land Rover Discovery
  
  Jaguar Nashville loaned a new Land Rover Discovery to us for a week while the Jaguar XKRS was in for service. We took this opportunity to Read More »
- Loaded and ready for Corvettes at Carlisle
  
  The trailer arrived and it looks great. We now have the car loaded ready for the first road trip to Corvettes at Carlisle 🙂 [nggallery id=87] Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- 88 Corvette Engine Removal
  
  We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More »
- Pink Floyd Week 26
  
  We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
- Project 63 – The new addition, a 1963 Split Window
  
  [nggallery id=75] Read More »
- Human Car Sounds Guy – Australia’s Got Talent
  
  This is pretty funny! Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Pink Floyd Day 2
  
  Day 2 (well night 2) was a short day but we made good progress on removing the interior. Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- How To Park A Jaguar XKRS
  
  How To Park A Jaguar XKRS (with no help from your friends) Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »