Men’s Room Sink

October 28, 2015 Funny

We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one from back in the day is still cool.

Now if you compare it to the bathroom of today, no more shoe shines 🙂

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- Pink Floyd – Week 20 (Body meets Chassis)
  
  Finally week 20 is here and the body is ready to put back on the chassis. [nggallery id=58] Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- 2017 Auburn Cord Duesenberg Citrus Meet
  
  2017 Auburn Cord Duesenberg Citrus Meet & Boca Raton Concours d’elegance Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Pink Floyd has Glass
  
  Now that the windshield is installed it is really starting to look like a car again! [nggallery id=67] Read More »
- 2015 SEMA Battle Of The Builders
  
  Full Octane Garage was very excited to have our 1956 Corvette Resto-Mod (Project LS-56) accepted in the 2015 SEMA Battle Of The Builders competition. It was Read More »
- 1931 Auburn – Getting ready for Atlanta Concours
  
  For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- The NewTrailer Build Is Complete
  
  The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More »
- Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile
  
  This is pretty impressive. The Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile Drag Racing Battle at PBIR. Video from Drag Times. Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Cool shot of a Jag XJ220 Flaming Burnout
  
  Now this is a pretty cool shot of a Jag XJ220! Read More »
- Speedway Motors Front Disk Brake Kit Install & Review
  
  We decided to try out the Speedway Motors Front Disk Brake Kit so we put together an installation & Review video. This is their part number Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- 1950 Chevy Truck Paint Progress
  
  We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More »
- Initial Engine Start Up
  
  Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
  
  Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- Project 63 gets a some new skin and bling
  
  Well while we had the transmission out for a 5 speed sway we decided to go ahead and rebuild the numbers matching 327. Unfortunately that is adding 4 weeks to Read More »