SEMA Day 2

November 10, 2015 Banner, Events, Just Cool

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- 1950 Chevy Five Window Progress Update 01/15/2017
  
  Here is a quick walk around video of the progress on our 1950 Chevy Truck Restorod project as of 1/15/17. Read More »
- Regen Mode on My 2015 GMC Duramax REALLY STINKS!
  
  The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Pink Floyd Day 1
  
  Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Project 63 Paint Progress
  
  The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding Read More »
- Wait, That’s My Car! (Strange Car Stories)
  
  Wait, That’s My Car! Do you know where your car is? This episode is the story that will make you think twice before you leave your Read More »
- 1963 Corvette Split Window (Project Second Chance)
  
  Well it seems I am a gluten for punishment, I am back for my 4th build since 2012. At the end of each build I keep Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- Cancel Save changes Only $363.00 Per Year To Insure My Porsche 911
  
  Do not let the cost of insurance get in the way of buying your DREAM CAR! You will be surprised to find out how inexpensive it Read More »
- Full Octane Garage Now Offers Corvette Replacement Chassis
  
  We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More »
- Project 63 – Interior Progress Update 5/13/13
  
  I am finally making good progress on the interior. I was able to get the Second Skin heat mat down and I got the whole rear compartment other Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- 1950 Chevy Truck Body Install
  
  We finally mounted the body on the frame of the 1950 Chevy Truck. Read More »
- Pink Floyd – Week 18 progress (Finally Got Some Color)
  
  Week 18 began with finally getting some color on a few parts. We tried to lay down color in week 17 but we ran into fisheye issues and Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »
- SEMA Day 2
  
  Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- You know you are a Car Guy if… episode 2
  
  2nd in the series of “You know you are a Car Guy if…” This is a fun series on how crazy car guys can get. This Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »