Correcting that pesky Brake Squeal

December 26, 2015 Banner, How To

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
  
  A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- Paul Walker Porsche Blames Him For His Own Death
  
  Just in from TMZ! Paul Walker Porsche Blames Him For His Own Death http://www.tmz.com/2015/11/16/paul-walker-porsche-lawsuit-crash/ Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Insite from Jessie James
  
  Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- LOOK, it’s an engine! Pink Floyd now has an Engine and 5 speed
  
  Pink Floyd finally got an engine and 5 speed installed today. It will not belong before it gets a body! [nggallery id=56] Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- 5 MUST HAVE Accessories for your GMC Denali Sierra Pick Up!
  
  The Full Octane Garage presents the top 5 Accessories for the GMC Denali Sierra Pick Up! Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- C7 is on order :)
  
  The new 2014 C7 is on order and will arrive soon! Read More »
- The 2019 Jaguar I-Pace… Your Luxury Tesla Alternative?
  
  Thanks to Craig and Ronnie at Jaguar Nashville, The Full Octane Garage got to spend some quality time in Jaguar’s 1st EV, the I-Pace. Is it Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- A Day at the Porsche Driving Experience
  
  The Full Octane Garage was invited down to Porsche North American Headquarters in Atlanta by Hagerty’s for a special meet and greet and to check out Read More »
- Floyd – Week 5 Progress Update
  
  Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More »
- Corvette Montage
  
  Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
  
  This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More »
- Pink Floyd Day 2
  
  Day 2 (well night 2) was a short day but we made good progress on removing the interior. Read More »
- Disk Brake Squeal Fix – The Easy Way
  
  This is a short video on how to reduce brake noise from disk brakes. We used a product called “Disc Brake Quiet” Please support our channel Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »