Removing the CAB from the latest 1950 Chevy truck project | Full Octane Garage

Removing the CAB from the latest 1950 Chevy truck project

March 22, 2016 1950 Chevy Truck, Banner

A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- SEMA Day 1 (Shelby Daytona #1)
  
  (Shelby Daytona #1) It was very exciting to see $20 Million dollars of history sitting in front of you! Read More »
- 1931 Auburn at the 2016 Atlanta Concours
  
  We had a fun time with the 1931 Auburn at the 2016 Atlanta Concours last weekend. We wanted to share a few pictures and we will Read More »
- 1960 Corvette (Pink Floyd) Tear Down
  
  Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- Pink Floyd Before
  
  In 2012 I decided I wanted to restore a C1 corvette for my 50th birthday so my journey began 🙂 I looked on craigs list, ebay Read More »
- Looking More Like A Car!
  
  We finally got all of the body parts back on the car so it is looking more like a real car now. Read More »
- Nashville Cars And Coffee 12-17-16
  
  This is a preview of a few of the cars that braved the wet roads and attended Nashville Cars And Coffee on 12-17-16. Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- 1950 Chevy Five Window Progress Update 03/20/2017
  
  We are finally back on the 50 Five Window project again and have made some good progress. Over the weekend we had to finish up painting Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Floyd – NOW IN PRIMER
  
  We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More »
- TOP SECRET Lane Motor Museum Tour (Behind the scenes)
  
  TOP SECRET Lane Motor Museum Tour (Behind the scenes + Basement Tour including the Nissan Heritage Collection). OK, not so TOP SECRET but the basement and Read More »
- Project 63 gets a some new skin and bling
  
  Well while we had the transmission out for a 5 speed sway we decided to go ahead and rebuild the numbers matching 327. Unfortunately that is adding 4 weeks to Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- 1931 Auburn – Getting ready for Atlanta Concours
  
  For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- The NewTrailer Build Is Complete
  
  The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Very Cool Right Hand Drive 58 Corvette
  
  This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More »
- Project 63 gets an engine
  
  Well it is getting close now, we got the engine back from the machine shop this week so this weekend project 63 got an engine and Read More »
- Project 63 – Interior Progress Update 5/13/13
  
  I am finally making good progress on the interior. I was able to get the Second Skin heat mat down and I got the whole rear compartment other Read More »

December 2018

M T W T F S S

« Nov

1 2

3 4 5 6 7 8 9

10 11 12 13 14 15 16

17 18 19 20 21 22 23

24 25 26 27 28 29 30

31