Categories
-
Facebook
Archives
-
Recent Posts
-
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Full Octane Garage Now Offers Corvette Replacement Chassis
We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More » -
Floyd – NOW IN PRIMER
We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More » -
1 Year with the GMC Denali Sierra 1500, An Owner’s Perspective
Well it has been 1 year and 36K miles since we bought the 2017 GMC Denali Sierra 1500. In this video, we will review the good, Read More » -
Runaway Peterbuilt
This is pretty Scary Stuff Read More » -
Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More » -
Can a Spark Plug Break Glass?
More fun from youetube! This is pretty crazy, who is going to try this first? Read More » -
Making a little more progress!
We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More » -
1950 Chevy 5 Window Truck Project Update 6/18/17
We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More » -
Frame Assembly and Parts Painting Begins
Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More » -
Comedians in Cars Getting Coffee with a 63 Split Window and President Obama
This turned out to be much funnier than I had anticipated. Awesome 63 Split Window Corvette!!! Thanks to Comedians In Cars Getting Coffee for another great Read More » -
Pink Floyd Day 5
It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More » -
Floyd – Week 3 – The car formally known as Pink Floyd
Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More » -
A Small Bit Of Bad News :( (but it is not too bad)
While cleaning out the rocker area I uncovered some severely rusted metal under the fiberglass, who would have known there would be metal in a fiberglass Read More » -
DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More » -
Pink Floyd Week 25 (Look mom, no teeth)
This is a typical TN car, no teeth 🙂 Ok the grille teeth have not been installed yet but Pink Floyd will soon have teeth again. Read More » -
2014 Corvette next to 1960 Corvette
All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More » -
Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More » -
Insite from Jessie James
Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More » -
70 Exotic Cars and 1 Great Cause!
16The Full Octane Garage participated in the 2018 Team Annie Rose Leukemia Foundation Poker Run with an amazing collection of over 70 exotic cars. Read More » -
What does the inside of a Fuel Filter look like after 300,000 miles?
For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More » -
Pink Floyd Week 19 Progress (Color is looking GREAT!)
Week 19 continues to bring a lot of progress. We started color sanding the body and it is looking GREAT so far! We have been working hard putting Read More » -
Pink Floyd – Week 20 (Body meets Chassis)
Finally week 20 is here and the body is ready to put back on the chassis. [nggallery id=58] Read More » -
50 Chevy Truck Body Progress
We finally got back to work on the 1950 Chevy 5 window truck project this week. Today Dennis spent a bunch of time prepping the majority Read More » -
The Redneck Spin Chair
This would be a crazy ride, not sure I could handle it! Read More » -
The DJI Phantom4 , a Visual Introduction
As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More » -
88 Corvette Engine Removal
We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More » -
Pavers going down in dirty space (on a budget)
Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More » -
Nashville Cars And Coffee 12-17-16
This is a preview of a few of the cars that braved the wet roads and attended Nashville Cars And Coffee on 12-17-16. Read More » -
Project 63 – The new addition, a 1963 Split Window
[nggallery id=75] Read More »
-
July 2026 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31




