Nissan Pathfinder Long term Review, An Owners Perspective

September 19, 2016 Banner

Nissan Pathfinder Long term Review, An Owners Perspective

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Removing and Storing the Freedom Roof Panels for the Jeep Wrangler Unlimited
  
  Today the Full Octane Garage will cover, with the help of our good friend Elvis from the Golden Drive and our fellow Jeep enthusiast, Zlatko, how Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
  
  A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More »
- Final Buffing Complete
  
  Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- Disk Brake Squeal Fix – The Easy Way
  
  This is a short video on how to reduce brake noise from disk brakes. We used a product called “Disc Brake Quiet” Please support our channel Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- The NewTrailer Build Is Complete
  
  The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Barry Alexander Classic Garage Tour
  
  We had a very nice tour of Barry Alexanders awesome new collector garage! Some very nice cars. [nggallery id=71] Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- Project 5 Window Body Update
  
  We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- Jay Leno on the new ZO6
  
  Jay Leno takes a close look at the new Corvette Z06. Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- Black Vinyl Wrap for the new Corvette
  
  I decided to vinyl wrap the center section of the top and my first attempt was in a matt carbon fiber look. I tried it for a Read More »