Black Vinyl Wrap for the new Corvette | Full Octane Garage

Black Vinyl Wrap for the new Corvette

July 3, 2014 Corvette, How To

I decided to vinyl wrap the center section of the top and my first attempt was in a matt carbon fiber look. I tried it for a day or so and it just made it look like the car had a convertible top so I ordered 3M 1080 G212 Scotchprint Gloss Black Metallic Vinyl Wrap for the next round and it looks great!

BEFORE:

AFTER:

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Very cool Camper
  
  This is a very cool camper. Read More »
- Project 5 Window Body Update
  
  We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Final Buffing Complete
  
  Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- Full Octane Garage Now Offers Corvette Replacement Chassis
  
  We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More »
- UnderCover Bed Cover for your GMC Truck
  
  The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Read More »
- 1950 Chevy Truck F-Body Manifold Modification For LS
  
  It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- C2 ZR1 ’64 Corvette Stingray
  
  This is a custom C2 Corvette called C2 ZR1 with the new aluminum block LS9, supercharged ZR1 powerplant. Thanks to Miatamaniacmike for this video. Read More »
- 2016 October Wilson County Bank Car Show & Fall Fest
  
  Here are some pictures of the great cars that showed up for the 2016 October Wilson County Bank Car Show & Fall Fest. There were 474 cars Read More »
- Project LS-56 1956 C1 Corvette Restomod
  
  Read More »
- Welcome to the Full Octane Garage!
  
  Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More »
- Nissan Pathfinder Long term Review, An Owners Perspective
  
  Nissan Pathfinder Long term Review, An Owners Perspective Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Installing Heating and Cooling in my Garage!
  
  FULL OCTANE your GARAGE! In this video we will discuss the various options for heating and cooling your garage and then a more detailed discussion of Read More »
- Funniest boat launch ever!
  
  You have to watch this the whole way though but it is funny! Read More »
- Pink Floyd now has a new color!
  
  After several weeks of prep work we finally shot the color and clear on Pink Floyd today. The project is getting exciting now that the car Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- Project 63 Paint Progress
  
  The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- Pink Floyd Week 25 (Look mom, no teeth)
  
  This is a typical TN car, no teeth 🙂 Ok the grille teeth have not been installed yet but Pink Floyd will soon have teeth again. Read More »
- A Mini Monster Truck Catching Nice Air
  
  A Mini Monster Truck Catching Nice Air! Read More »

April 2024

M T W T F S S

« Dec

1 2 3 4 5 6 7

8 9 10 11 12 13 14

15 16 17 18 19 20 21

22 23 24 25 26 27 28

29 30