Categories
-
Facebook
Archives
-
Recent Posts
-
Men’s Room Sink
We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More » -
1960 Corvette Soda Blasting and Paint Stripping Process
This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More » -
Very cool Camper
This is a very cool camper. Read More » -
DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More » -
1955 MG TF New Top Project
After 2 years of having a new rag top in the box we finally got around to installing the new top. It looks so much nicer Read More » -
Project Pink Floyd – The Doors Are On!
I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More » -
Welcome to the Full Octane Garage!
Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More » -
Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More » -
Runaway Peterbuilt
This is pretty Scary Stuff Read More » -
Project LS-57 Project Update 9/23/18
BEFORE: Read More » -
Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More » -
Full Octane Garage SHORT CUT featuring the 2016 Range Rover SVR
Our SHORT CUT videos are brief “videos of opportunity” Today’s video features the new 2016 Range Rover SVR, Range Rover’s 550hp supercharged AWD SUV. Read More » -
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Carl’s Custom Cars Built The Buick Roadmaster
I saw this car in person at SEMA 2015 and it was one awesome build. Congrats to being in the top 25 builds! Thanks to HotRod.com Read More » -
Engine and Trans mocked up in Project 50 Five Window
We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More » -
Pink Floyd Day 9
Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More » -
Project 63 – The new addition, a 1963 Split Window
[nggallery id=75] Read More » -
Human Car Sounds Guy – Australia’s Got Talent
This is pretty funny! Read More » -
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More » -
Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More » -
Project 63 week 3 – Tunnel Repair
Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More » -
What does the inside of a Fuel Filter look like after 300,000 miles?
For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More » -
Barry Alexander Classic Garage Tour
We had a very nice tour of Barry Alexanders awesome new collector garage! Some very nice cars. [nggallery id=71] Read More » -
2017 Boca Raton Concours
We took some pictures of our visit at the 2017 Boca Raton Concours. Read More » -
You know you are a Car Guy if…episode 3
3rd in the series “You know you are a Car Guy if…” Read More » -
Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More » -
Floyd – Week 4 Progress Update
Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More » -
Removing the CAB from the latest 1950 Chevy truck project
A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More » -
Initial Engine Start Up
Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
-
June 2023 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30