2015 SEMA Battle Of The Builders

November 12, 2015 Banner, Corvette, Events, Just Cool

Full Octane Garage was very excited to have our 1956 Corvette Resto-Mod (Project LS-56) accepted in the 2015 SEMA Battle Of The Builders competition. It was an honor to be a part of a competition with some of the great builders from around the world.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- 10 Car Logos You Probably Never Knew The Meaning Of!
  
  Thanks to Car Throttle for this clip. Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- Funniest boat launch ever!
  
  You have to watch this the whole way though but it is funny! Read More »
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Pink Floyd Week 25 (Look mom, no teeth)
  
  This is a typical TN car, no teeth 🙂 Ok the grille teeth have not been installed yet but Pink Floyd will soon have teeth again. Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- Only in Tennessee
  
  Only in Tennessee, it sure does not look like he is walking on the track 🙂 Read More »
- Pink Floyd gets some BLING
  
  Pink Floyd started getting some BLING this week. The chrome has started arriving back from being redone so on it goes. We also finished the bulk Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- C2 ZR1 ’64 Corvette Stingray
  
  This is a custom C2 Corvette called C2 ZR1 with the new aluminum block LS9, supercharged ZR1 powerplant. Thanks to Miatamaniacmike for this video. Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- Manually Shifting Your Automatic Transmission (Explained)
  
  This is a video on how to Manually Shift Your Automatic Transmission in a GMC or Chevy truck. Read More »
- New 1950 Shop Truck Project
  
  We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More »
- Regen Mode on My 2015 GMC Duramax REALLY STINKS!
  
  The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More »
- New Wheels and Tires Arrived
  
  The new wheels and tires arrived today, put them on for a test fit. Read More »
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »