For Those Who Need Something Easier To Park and Drive | Full Octane Garage

For Those Who Need Something Easier To Park and Drive

October 20, 2015 Just Cool

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- A Week with the 2017 Land Rover Discovery
  
  Jaguar Nashville loaned a new Land Rover Discovery to us for a week while the Jaguar XKRS was in for service. We took this opportunity to Read More »
- Floyd – NOW IN PRIMER
  
  We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More »
- Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
  
  We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More »
- A Mini Monster Truck Catching Nice Air
  
  A Mini Monster Truck Catching Nice Air! Read More »
- Floyd – Week 3 – The car formally known as Pink Floyd
  
  Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More »
- Floyd – Week 5 Progress Update
  
  Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More »
- Looking More Like A Car!
  
  We finally got all of the body parts back on the car so it is looking more like a real car now. Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Corvette Montage
  
  Read More »
- MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN
  
  MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN COURTESY OF VELOCITY MOTORCARS! Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Pink Floyd Day 2
  
  Day 2 (well night 2) was a short day but we made good progress on removing the interior. Read More »
- 1950 Chevy Five Window Progress Update 03/20/2017
  
  We are finally back on the 50 Five Window project again and have made some good progress. Over the weekend we had to finish up painting Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- 2017 Auburn Cord Duesenberg Citrus Meet
  
  2017 Auburn Cord Duesenberg Citrus Meet & Boca Raton Concours d’elegance Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- Pink Floyd – Week 17 progress
  
  Week 17 has been busy. We started putting the frame back together. The new front suspension is now complete, the brake lines are plumbed and we are close Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- How Much To Insure A New 2019 Ford GT ($500K Value)
  
  You now have an extra $500,000 and want to buy a 2019 Ford GT, you now ask how much is my insurance going to cost??? When Read More »
- Black Vinyl Wrap for the new Corvette
  
  I decided to vinyl wrap the center section of the top and my first attempt was in a matt carbon fiber look. I tried it for a Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- SEMA Day 2
  
  Read More »

August 2026

M T W T F S S

« Dec

1 2

3 4 5 6 7 8 9

10 11 12 13 14 15 16

17 18 19 20 21 22 23

24 25 26 27 28 29 30

31