Looking at a 911

February 8, 2013 Uncategorized

Looking at a 911 for a friend.

[nggallery id=73]

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Chasing a McLaren 720S on the Dragon, 4K BTR 2018
  
  The Full Octane Garage took our classic Porsche 911 996 Cabriolet along with 11 exotic cars to drive the back roads of North Carolina with the Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- New Front SuspensionTest Fit
  
  We did a test fit on the new front suspension test fit tonight. Over all it went in very easy, have a few items to work Read More »
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- Welcome to the Full Octane Garage!
  
  Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More »
- Very Cool Right Hand Drive 58 Corvette
  
  This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More »
- 2017 Outtakes & Bloopers. The Fast and the Funniest!
  
  Join us as we recap our 1st full year on YouTube as Full Octane Garage! 180+ videos, 1000+ subs some new cars, new events and new Read More »
- Project 63 Paint Progress
  
  The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- Project 63 SWC is Finished
  
  Project 63 is finally finished. The new trailer came in yesterday so life is good! [nggallery id=90] [nggallery id=86][nggallery id=75][nggallery id=76][nggallery id=77][nggallery id=78][nggallery id=79][nggallery id=80][nggallery id=85][nggallery Read More »
- Final Buffing Complete
  
  Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »
- Cool shot of a Jag XJ220 Flaming Burnout
  
  Now this is a pretty cool shot of a Jag XJ220! Read More »
- Harbor Freight One Man Brake Bleeder Product Review
  
  This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- New Wheels and Tires Arrived
  
  The new wheels and tires arrived today, put them on for a test fit. Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- When you can not afford a real one
  
  We found this on Pintrest, for those who can not afford a real one 🙂 Read More »
- Nissan Pathfinder Long term Review, An Owners Perspective
  
  Nissan Pathfinder Long term Review, An Owners Perspective Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Floyd – NOW IN PRIMER
  
  We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More »
- Pink Floyd Week 26
  
  We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »