April 20, 2016 - Full Octane Garage | Full Octane Garage

Daily Archives: April 20, 2016

Engine and Trans mocked up in Project 50 Five Window

April 20, 2016 1950 Chevy Truck, Banner

We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project is doing some measuring and adjusting on the LS engine plates, I think it is too far forward.

Read More

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Week 29 Progress (WOW, it is looking Great!)
  
  WOW, week 29 and we can see light at the end of the tunnel. We got the interior mostly complete this week and I finished up Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Jay Leno on the new ZO6
  
  Jay Leno takes a close look at the new Corvette Z06. Read More »
- Floyd – Week 15 (Frame repair COMPLETE)
  
  As week 15 comes to a close we made great progress on the rust repair in the frame. There was a little more damage than I Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- 1931 Auburn brought home the Presidents Choice best in show award
  
  We had a great time at the Wilson County Car show on Sunday. Full Octane Garage’s recent project which is a 1931 Auburn brought home the Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- UnderCover Bed Cover for your GMC Truck
  
  The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Project LS-57 Project Update 9/23/18
  
  BEFORE: Read More »
- Floyd – Week 7 Progress Update
  
  Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More »
- 1950 Chevy Five Window Progress Update 03/20/2017
  
  We are finally back on the 50 Five Window project again and have made some good progress. Over the weekend we had to finish up painting Read More »
- Funniest boat launch ever!
  
  You have to watch this the whole way though but it is funny! Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Pink Floyd Day 16 (FUN WITH STRIPPER)
  
  OK, get your mind out of the gutter, I meant paint stripper and not real strippers 🙂 I took today to work with chemical stripper to Read More »
- 1960 Corvette (Pink Floyd) Tear Down
  
  Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Tim Allen’s Car Collection of Authentic American Made Motors – GQ’s Car Collectors – Los Angeles
  
  Tim Allen is such a funny guy and it is nice to see a fellow car guy with such a cool collection. Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- Loaded and ready for Corvettes at Carlisle
  
  The trailer arrived and it looks great. We now have the car loaded ready for the first road trip to Corvettes at Carlisle 🙂 [nggallery id=87] Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Pink Floyd – Week 17 progress
  
  Week 17 has been busy. We started putting the frame back together. The new front suspension is now complete, the brake lines are plumbed and we are close Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Project LS-56 1956 C1 Corvette Restomod
  
  Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- Project Pink Floyd – Week 6 Progress Update
  
  Week number 6 has been a little slow. I have been waiting on parts to complete the rockers. We also got the motor uncrated and on Read More »
- Pink Floyd now has a new color!
  
  After several weeks of prep work we finally shot the color and clear on Pink Floyd today. The project is getting exciting now that the car Read More »
- FOR SALE – 1963 Split Window Corvette (Call for Price)
  
  For sale is a spectacular 1963 Corvette Split Window Coupe. (Call for Price) Don’t miss this opportunity to buy a very rare piece of automotive rolling Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »

April 2016

M T W T F S S

« Mar May »

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30