May 2016 - Full Octane Garage | Full Octane Garage

Monthly Archives: May 2016

Project 57 Has Arrived

May 21, 2016 1957 GMC Project LS-Z57, Banner

It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- Initial Engine Start Up
  
  Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- Project 5 Window Body Update
  
  We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix Read More »
- Pink Floyd Gets Some Teeth
  
  Pink Floyd no longer looks like he is from TN, he now has teeth in his new Grille. We also go the back bumpers installed, now Read More »
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Regen Mode on My 2015 GMC Duramax REALLY STINKS!
  
  The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- C7 is on order :)
  
  The new 2014 C7 is on order and will arrive soon! Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Project 63 Vintage Air Arrived Today
  
  The UPS guy just dropped off some gifts, the Vintage Air Arrived for Project 63. [nggallery id=78] Read More »
- Pink Floyd Day 13
  
  Day 13 started the Media Blasting with baking soda. It is quite messy but very cool! [nggallery id=33] Read More »
- Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile
  
  This is pretty impressive. The Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile Drag Racing Battle at PBIR. Video from Drag Times. Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »
- Harbor Freight One Man Brake Bleeder Product Review
  
  This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Chasing a McLaren 720S on the Dragon, 4K BTR 2018
  
  The Full Octane Garage took our classic Porsche 911 996 Cabriolet along with 11 exotic cars to drive the back roads of North Carolina with the Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- When you can not afford a real one
  
  We found this on Pintrest, for those who can not afford a real one 🙂 Read More »