Categories
-
Facebook
Archives
-
Recent Posts
-
The Making Of A Pallet Wood Wall In The Full Octane Garage
This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More » -
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
Pink Floyd Week 26
We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More » -
10 Car Logos You Probably Never Knew The Meaning Of!
Thanks to Car Throttle for this clip. Read More » -
Porsche 911 DIY Wheel Spacer Installation (Wide Body)
This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More » -
Pink Floyd – Week 16 progress
Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More » -
Project Z57 GMC Chassis from RR Frames has arrived
The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More » -
Frame Work Continues
We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More » -
Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More » -
Project 63 week 3 – Tunnel Repair
Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More » -
1931 Auburn Overheating
The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More » -
Project LS-56 has begun – 56 Corvette
Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More » -
Pink Floyd Day 3
We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More » -
Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More » -
Full Octane Garage Now Offers Corvette Replacement Chassis
We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More » -
Project 5 Window Body Update
We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix Read More » -
1950 Chevy Five Window Progress Update 03/20/2017
We are finally back on the 50 Five Window project again and have made some good progress. Over the weekend we had to finish up painting Read More » -
Project 63 is ALIVE
Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More » -
A Week with the 2017 Land Rover Discovery
Jaguar Nashville loaned a new Land Rover Discovery to us for a week while the Jaguar XKRS was in for service. We took this opportunity to Read More » -
Stacey David’s Gearz TV Set Tour
The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More » -
1963 Corvette Split Window (Project Second Chance)
Well it seems I am a gluten for punishment, I am back for my 4th build since 2012. At the end of each build I keep Read More » -
New 1957 GMC Shop Truck Project
We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More » -
Project 57 Has Arrived
It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More » -
Pink Floyd Day 8
Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More » -
Putting RUST 911 to the test!
As part of our product testing we decided to put RUST 911 to the test and here is our Rust 911 review! Read More » -
Project LS-56 1956 C1 Corvette Restomod
-
1931 Auburn – Getting ready for Atlanta Concours
For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More » -
you know you are a Car Guy if… Episode 1
1st in a series of short videos that define the Real “Car Guy”! Let us know what you think in the comments! Read More » -
Insite from Jessie James
 Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More » -
Floyd – Week 4 Progress Update
Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
-
September 2025 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30