Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017 | Full Octane Garage

Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017

March 18, 2017 1957 GMC Project LS-Z57, Banner

OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be using for the build.

Craigslist here I come, chassis, engine, trans and drive train. Time to move this stuff on to the next owner 🙂

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project 63 gets a some new skin and bling
  
  Well while we had the transmission out for a 5 speed sway we decided to go ahead and rebuild the numbers matching 327. Unfortunately that is adding 4 weeks to Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Pink Floyd gets some BLING
  
  Pink Floyd started getting some BLING this week. The chrome has started arriving back from being redone so on it goes. We also finished the bulk Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- 1931 Auburn at the 2016 Atlanta Concours
  
  We had a fun time with the 1931 Auburn at the 2016 Atlanta Concours last weekend. We wanted to share a few pictures and we will Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- Very Cool Right Hand Drive 58 Corvette
  
  This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Project Pink Floyd Day 15
  
  More fun with Baking Soda 🙂 We are doing a DIY soda blasting project using an Eastwood Dual Blast unit. This project took about 600 lbs Read More »
- Why is the LS so good?
  
  Thanks to /Drive for this video. Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- Cool shot of a Jag XJ220 Flaming Burnout
  
  Now this is a pretty cool shot of a Jag XJ220! Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- Correcting that pesky Brake Squeal
  
  Read More »
- Carl’s Custom Cars Built The Buick Roadmaster
  
  I saw this car in person at SEMA 2015 and it was one awesome build. Congrats to being in the top 25 builds! Thanks to HotRod.com Read More »
- 2015 Audi S5 Cabriolet Review An Owner’s Perspective
  
  2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More »
- 1931 Auburn – Getting ready for Atlanta Concours
  
  For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More »
- Hank Hill proves WD40 is the answer to all problems
  
  Read More »
- Week 29 Progress (WOW, it is looking Great!)
  
  WOW, week 29 and we can see light at the end of the tunnel. We got the interior mostly complete this week and I finished up Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Pink Floyd Day 4
  
  It was a short night tonight. We were able to remove the parking brake, hood release and dash cluster. I also put some stuff on Craig Read More »
- Bel Air off to a new home
  
  [nggallery id=94] Read More »
- You know you are a Car Guy if… episode 2
  
  2nd in the series of “You know you are a Car Guy if…” This is a fun series on how crazy car guys can get. This Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- Disk Brake Squeal Fix – The Easy Way
  
  This is a short video on how to reduce brake noise from disk brakes. We used a product called “Disc Brake Quiet” Please support our channel Read More »
- A Small Bit Of Bad News :( (but it is not too bad)
  
  While cleaning out the rocker area I uncovered some severely rusted metal under the fiberglass, who would have known there would be metal in a fiberglass Read More »

December 2025

M T W T F S S

« Dec

1 2 3 4 5 6 7

8 9 10 11 12 13 14

15 16 17 18 19 20 21

22 23 24 25 26 27 28

29 30 31