UnderCover Bed Cover for your GMC Truck

February 7, 2018 Banner, GMC Truck Stuff, How To, Product Review

The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Outtakes….

If you plan on buying this bed cover and you liked our video please consider supporting our channel by using the following purchase link and it will include FREE SHIPPING

https://amzn.to/2GmteHz

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Pink Floyd now has a new color!
  
  After several weeks of prep work we finally shot the color and clear on Pink Floyd today. The project is getting exciting now that the car Read More »
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- Harbor Freight One Man Brake Bleeder Product Review
  
  This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Loaded and ready for Corvettes at Carlisle
  
  The trailer arrived and it looks great. We now have the car loaded ready for the first road trip to Corvettes at Carlisle 🙂 [nggallery id=87] Read More »
- Pink Floyd Day 6
  
  Day number 6 ends with a good amount of progress. We removed the doors and just about finished up under the dash, just have the pedals Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Pink Floyd Gets Some Teeth
  
  Pink Floyd no longer looks like he is from TN, he now has teeth in his new Grille. We also go the back bumpers installed, now Read More »
- Insite from Jessie James
  
  Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- A Week with the 2017 Land Rover Discovery
  
  Jaguar Nashville loaned a new Land Rover Discovery to us for a week while the Jaguar XKRS was in for service. We took this opportunity to Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Correcting that pesky Brake Squeal
  
  Read More »
- Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
  
  We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More »
- 1931 Auburn brought home the Presidents Choice best in show award
  
  We had a great time at the Wilson County Car show on Sunday. Full Octane Garage’s recent project which is a 1931 Auburn brought home the Read More »
- Pink Floyd Before
  
  In 2012 I decided I wanted to restore a C1 corvette for my 50th birthday so my journey began 🙂 I looked on craigs list, ebay Read More »
- Wait, That’s My Car! (Strange Car Stories)
  
  Wait, That’s My Car! Do you know where your car is? This episode is the story that will make you think twice before you leave your Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- Project Z57 (1957 GMC) Back From Media Blast
  
  We picked up the truck from media blast today and to our surprise most of the body was in really nice shape. Well at least the Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Very Cool Right Hand Drive 58 Corvette
  
  This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Pink Floyd – Week 20 (Body meets Chassis)
  
  Finally week 20 is here and the body is ready to put back on the chassis. [nggallery id=58] Read More »
- 2015 Audi S5 Cabriolet Review An Owner’s Perspective
  
  2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- Project 63 – Interior Progress Update 5/13/13
  
  I am finally making good progress on the interior. I was able to get the Second Skin heat mat down and I got the whole rear compartment other Read More »
- Why is the LS so good?
  
  Thanks to /Drive for this video. Read More »