August 5, 2018 - Full Octane Garage | Full Octane Garage

Daily Archives: August 5, 2018

SOLD – 1950 Chevy 3100 5 Window Restomod Truck

August 5, 2018 1950 Chevy Truck, Banner

Up for sale is a 1950 Chevy five window truck, this is a fresh restoration with lots of new metal. This truck drives awesome!

Read More

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- 1950 Chevy Truck F-Body Manifold Modification For LS
  
  It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More »
- Pink Floyd Day 14
  
  Made some more progress media blasting today. [nggallery id=34] Read More »
- 1931 Auburn – Getting ready for Atlanta Concours
  
  For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More »
- Comedians in Cars Getting Coffee with a 63 Split Window and President Obama
  
  This turned out to be much funnier than I had anticipated. Awesome 63 Split Window Corvette!!! Thanks to Comedians In Cars Getting Coffee for another great Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- You know you are a Car Guy if…episode 3
  
  3rd in the series “You know you are a Car Guy if…” Read More »
- Project Pink Floyd Day 15
  
  More fun with Baking Soda 🙂 We are doing a DIY soda blasting project using an Eastwood Dual Blast unit. This project took about 600 lbs Read More »
- 50 Chevy Truck Body Progress
  
  We finally got back to work on the 1950 Chevy 5 window truck project this week. Today Dennis spent a bunch of time prepping the majority Read More »
- TOP SECRET Lane Motor Museum Tour (Behind the scenes)
  
  TOP SECRET Lane Motor Museum Tour (Behind the scenes + Basement Tour including the Nissan Heritage Collection). OK, not so TOP SECRET but the basement and Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- Tesla P90D Test Drive (Ludicrous mode)
  
  We had a chance to take a Tesla P90D for a quick Test Drive and it had (Ludicrous mode). What a great car with exciting power! Read More »
- Project Pink Floyd – Week 6 Progress Update
  
  Week number 6 has been a little slow. I have been waiting on parts to complete the rockers. We also got the motor uncrated and on Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- Speedway Motors Front Disk Brake Kit Install & Review
  
  We decided to try out the Speedway Motors Front Disk Brake Kit so we put together an installation & Review video. This is their part number Read More »
- Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
  
  We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More »
- 5 MUST HAVE Accessories for your GMC Denali Sierra Pick Up!
  
  The Full Octane Garage presents the top 5 Accessories for the GMC Denali Sierra Pick Up! Read More »
- Project Z57 (1957 GMC) Back From Media Blast
  
  We picked up the truck from media blast today and to our surprise most of the body was in really nice shape. Well at least the Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- When you can not afford a real one
  
  We found this on Pintrest, for those who can not afford a real one 🙂 Read More »
- Floyd – NOW IN PRIMER
  
  We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- A Mini Monster Truck Catching Nice Air
  
  A Mini Monster Truck Catching Nice Air! Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- 1960 Corvette (Pink Floyd) Tear Down
  
  Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
  
  Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More »

August 2018

M T W T F S S

« May Sep »

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30 31