Categories
-
Facebook
Archives
-
Recent Posts
-
Floyd – Week 12 Progress Update
We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More » -
ICT Billet A/C Bracket Install & Review 551494-3
We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More » -
Harbor Freight One Man Brake Bleeder Product Review
This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More » -
First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More » -
Floyd Gets a New Power Plant and Suspension
We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More » -
GMC/Chevy Hide Or Reveal Radio Favorites (Explained)
This video will show you how to Hide Or Reveal your radio favorites for the GM Intellilink Infotainment System. Read More » -
Project 57 Has Arrived
It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More » -
5 Things I Hate About My GMC Diesel Denali
This is a video that talks about the top 5 Things I hate about my GMC Diesel Denali after 36k miles of ownership. Read More » -
Pink Floyd Day 6
Day number 6 ends with a good amount of progress. We removed the doors and just about finished up under the dash, just have the pedals Read More » -
Regen Mode on My 2015 GMC Duramax REALLY STINKS!
The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More » -
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Human Car Sounds Guy – Australia’s Got Talent
This is pretty funny! Read More » -
1931 Auburn – Getting ready for Atlanta Concours
For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More » -
Putting RUST 911 to the test!
As part of our product testing we decided to put RUST 911 to the test and here is our Rust 911 review! Read More » -
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
Pink Floyd – Week 22
Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More » -
2015 Audi S5 Cabriolet Review An Owner’s Perspective
2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More » -
Final Buffing Complete
Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More » -
Aston Martin Snow Test
This is crazy, an Aston Martin Snow Test. Read More » -
Chasing a McLaren 720S on the Dragon, 4K BTR 2018
The Full Octane Garage took our classic Porsche 911 996 Cabriolet along with 11 exotic cars to drive the back roads of North Carolina with the Read More » -
DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More » -
Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More » -
DIY Porsche Cayenne Key FOB Battery Replacement
A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More » -
Project 5 Window Chassis Update
We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More » -
Eastwood Brake Tube Flaring Tool Review (Item #25304)
This is a non-sponsored review of the Eastwood Brake Tube Flaring Tool (Item #25304). This is the firs time we used the tool and it is Read More » -
Project 63 Paint Progress
The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding Read More » -
The Redneck Spin Chair
This would be a crazy ride, not sure I could handle it! Read More » -
Pink Floyd’s New Jorney
Pink Floyd begins it’s New Journey from Texas to Brentwood Tn. We are looking forward to the arrival. Read More » -
Project 63 gets a some new skin and bling
Well while we had the transmission out for a 5 speed sway we decided to go ahead and rebuild the numbers matching 327. Unfortunately that is adding 4 weeks to Read More » -
Project GMC LS-Z57 – Day 1 Tear Down
Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
-





