Categories
-
Facebook
Archives
-
Recent Posts
-
Pink Floyd Day 3
We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More » -
Corvette Montage
-
First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More » -
1950 Chevy Truck F-Body Manifold Modification For LS
It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More » -
Project LS-57 Project Update 9/23/18
BEFORE: Read More » -
Speedway Motors Front Disk Brake Kit Install & Review
We decided to try out the Speedway Motors Front Disk Brake Kit so we put together an installation & Review video. This is their part number Read More » -
Very Cool Right Hand Drive 58 Corvette
This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More » -
Project 63 – 5/5 Progress Update
We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More » -
Pink Floyd Week 19 Progress (Color is looking GREAT!)
Week 19 continues to bring a lot of progress. We started color sanding the body and it is looking GREAT so far! We have been working hard putting Read More » -
Pink Floyd Is Alive!
We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More » -
Floyd – Week 12 Progress Update
We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More » -
SEMA Day 2
-
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Floyd – Week 5 Progress Update
Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More » -
Pink Floyd Day 1
Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More » -
This 1961 Kelly Coach Built Corvette
This is a very cool coach built early 60 Corvette and it has even a cooler story! Read More » -
A Day at the Porsche Driving Experience
The Full Octane Garage was invited down to Porsche North American Headquarters in Atlanta by Hagerty’s for a special meet and greet and to check out Read More » -
Pink Floyd Gets Some Teeth
Pink Floyd no longer looks like he is from TN, he now has teeth in his new Grille. We also go the back bumpers installed, now Read More » -
Project LS-56 1956 C1 Corvette Restomod
-
Pink Floyd Day 14
Made some more progress media blasting today. [nggallery id=34] Read More » -
you know you are a Car Guy if… Episode 1
1st in a series of short videos that define the Real “Car Guy”! Let us know what you think in the comments! Read More » -
Only in Tennessee
Only in Tennessee, it sure does not look like he is walking on the track 🙂 Read More » -
PupProtector Car Seat Cover Review
At the Full Octane Garage, when we use a product and find that it may benefit our viewers, we like review it after running it thru Read More » -
1931 Auburn – Getting ready for Atlanta Concours
For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More » -
2017 Boca Raton Concours
We took some pictures of our visit at the 2017 Boca Raton Concours. Read More » -
Floyd – Week 3 – The car formally known as Pink Floyd
Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More » -
Pink Floyd – Week 16 progress
Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More » -
New 1950 Shop Truck Project
We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More » -
Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More » -
Nissan Pathfinder Long term Review, An Owners Perspective
Nissan Pathfinder Long term Review, An Owners Perspective Read More »
-





