Categories
-
Facebook
Archives
-
Recent Posts
-
ICT Billet High Mount Narrow Bay AC Bracket Review (LS1/LS2/LS3 or Vortec 5.3) Part #551352-3
We had bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine but unfortunately I did not measure where my Read More » -
Men’s Room Sink
We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More » -
Frame Assembly and Parts Painting Begins
Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More » -
Pink Floyd Week 19 Progress (Color is looking GREAT!)
Week 19 continues to bring a lot of progress. We started color sanding the body and it is looking GREAT so far! We have been working hard putting Read More » -
The Making Of A Pallet Wood Wall In The Full Octane Garage
This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More » -
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
Frame Work Continues
We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More » -
MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN
MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN COURTESY OF VELOCITY MOTORCARS! Read More » -
Floyd Gets a New Power Plant and Suspension
We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More » -
Barry Alexander Classic Garage Tour
We had a very nice tour of Barry Alexanders awesome new collector garage! Some very nice cars. [nggallery id=71] Read More » -
Floyd – Week 11 Progress Update
WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More » -
1954 MGTF 1500 For Sale
1954 MGTF 1500. This is a beautiful car and though it is now a TF 1500 it is not numbers matching car. The car has a Read More » -
Gas Tank Leak? Red Kote Gas Tank Sealer Review & Application
We shot a fairly detailed video of building a new fuel tank and showing a Red Kote Fuel Tank Sealer Review & Application process. Read More » -
Floyd – Week 3 – The car formally known as Pink Floyd
Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More » -
The New 1988 Corvette Donor Car Has Arrived
If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More » -
Project 63 gets an engine
Well it is getting close now, we got the engine back from the machine shop this week so this weekend project 63 got an engine and Read More » -
1960 Corvette Soda Blasting and Paint Stripping Process
This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More » -
Project 5 Window Chassis Update
We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More » -
Welcome to the Full Octane Garage!
Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More » -
1931 Auburn – Getting ready for Atlanta Concours
For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More » -
Runaway Peterbuilt
This is pretty Scary Stuff Read More » -
Chassis Work Begins (Week 13)
Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More » -
1950 Chevy 5 Window Truck Project Update 6/18/17
We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More » -
1931 Auburn Overheating
The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More » -
Engineering Flow Chart
I found this on Facebook and it was too cool to not post! Read More » -
2017 Boca Raton Concours
We took some pictures of our visit at the 2017 Boca Raton Concours. Read More » -
Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More » -
1950 Chevy Five Window Progress Update 03/27/2017
We are making a little more progress on the 50. We got the LS harness all installed and mounted the computer under the passenger seat. We Read More » -
Project GMC LS-Z57 – Day 4 Tear Down – Mar 16, 2017
We completed removing all of the parts today that we plan to use and the parts have been delivered to media blast. Now the week or Read More » -
The DJI Phantom4 , a Visual Introduction
As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
-





