October 28, 2015 - Full Octane Garage

Daily Archives: October 28, 2015

Men’s Room Sink

October 28, 2015 Funny

We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one from back in the day is still cool.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- Welcome to the Full Octane Garage!
  
  Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Pink Floyd Day 2
  
  Day 2 (well night 2) was a short day but we made good progress on removing the interior. Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Tesla P90D Test Drive (Ludicrous mode)
  
  We had a chance to take a Tesla P90D for a quick Test Drive and it had (Ludicrous mode). What a great car with exciting power! Read More »
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- 2017 Outtakes & Bloopers. The Fast and the Funniest!
  
  Join us as we recap our 1st full year on YouTube as Full Octane Garage! 180+ videos, 1000+ subs some new cars, new events and new Read More »
- 2014 Corvette Delivery Day
  
  [nggallery id=96] Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- Project 63 got some color today!
  
  Project 63 got some color today! Pictures of Dennis doing the final shooting. Read More »
- WE BUY PROJECT CARS & TRUCKS
  
  Do you know anyone who has a project they started and cannot quite get it finished? Have a project you are tired of and are looking Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- Funniest boat launch ever!
  
  You have to watch this the whole way though but it is funny! Read More »
- 10 Car Logos You Probably Never Knew The Meaning Of!
  
  Thanks to Car Throttle for this clip. Read More »
- 1960 Corvette (Pink Floyd) Tear Down
  
  Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Floyd – Week 15 (Frame repair COMPLETE)
  
  As week 15 comes to a close we made great progress on the rust repair in the frame. There was a little more damage than I Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Very Cool Right Hand Drive 58 Corvette
  
  This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- 88 Corvette Engine Removal
  
  We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »