Removing the CAB from the latest 1950 Chevy truck project | Full Octane Garage

Removing the CAB from the latest 1950 Chevy truck project

March 22, 2016 1950 Chevy Truck, Banner

A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- Pink Floyd Week 26
  
  We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
- Hank Hill proves WD40 is the answer to all problems
  
  Read More »
- SEMA Day 2
  
  Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- 1955 MG TF is complete
  
  The 1955 MG TF restoration is now complete. [nggallery id=12] Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- Regen Mode on My 2015 GMC Duramax REALLY STINKS!
  
  The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Project 63 SWC is Finished
  
  Project 63 is finally finished. The new trailer came in yesterday so life is good! [nggallery id=90] [nggallery id=86][nggallery id=75][nggallery id=76][nggallery id=77][nggallery id=78][nggallery id=79][nggallery id=80][nggallery id=85][nggallery Read More »
- 2015 Audi S5 Cabriolet Review An Owner’s Perspective
  
  2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More »
- Floyd – Week 5 Progress Update
  
  Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More »
- Pink Floyd Day 14
  
  Made some more progress media blasting today. [nggallery id=34] Read More »
- Full Octane Garage SHORT CUT featuring the 2016 Range Rover SVR
  
  Our SHORT CUT videos are brief “videos of opportunity” Today’s video features the new 2016 Range Rover SVR, Range Rover’s 550hp supercharged AWD SUV. Read More »
- Very cool Camper
  
  This is a very cool camper. Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Project Pink Floyd Day 15
  
  More fun with Baking Soda 🙂 We are doing a DIY soda blasting project using an Eastwood Dual Blast unit. This project took about 600 lbs Read More »
- Atlanta Motor Speedway Autorama April 22 & 23
  
  The folks with the Atlanta Motor Speedway did an awesome multi-page article on Debby’s 31 Auburn in the Grease Magazine for the upcoming Motorama on Apr Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- 10 Car Logos You Probably Never Knew The Meaning Of!
  
  Thanks to Car Throttle for this clip. Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- SEMA Day 1 (Shelby Daytona #1)
  
  (Shelby Daytona #1) It was very exciting to see $20 Million dollars of history sitting in front of you! Read More »
- The DJI Phantom4 , a Visual Introduction
  
  As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More »
- Floyd – Week 15 (Frame repair COMPLETE)
  
  As week 15 comes to a close we made great progress on the rust repair in the frame. There was a little more damage than I Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »

October 2026

M T W T F S S

« Dec

1 2 3 4

5 6 7 8 9 10 11

12 13 14 15 16 17 18

19 20 21 22 23 24 25

26 27 28 29 30 31