October 6, 2016 - Full Octane Garage

Daily Archives: October 6, 2016

1931 Auburn – Getting ready for Atlanta Concours

October 6, 2016 Auburn, Banner

For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any old loose paint on the chassis and laying down a fresh coat of black. Next we cleaned, stripped and sanded the engine and repainted it with a fresh coat of green paint. There were several areas around the fender trip that was beat up from road rash so we had a color match done and we cleaned up and re-shot the red trim on the rear fenders. We also had several areas where the blue needed to be re-shot so we took car of that while we ere this far into it.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Floyd – Week 3 – The car formally known as Pink Floyd
  
  Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- Pink Floyd Day 4
  
  It was a short night tonight. We were able to remove the parking brake, hood release and dash cluster. I also put some stuff on Craig Read More »
- 5 Things I Hate About My GMC Diesel Denali
  
  This is a video that talks about the top 5 Things I hate about my GMC Diesel Denali after 36k miles of ownership. Read More »
- Floyd – Week 5 Progress Update
  
  Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More »
- Bugatti Veyron Gets Kicked To The Curb By Soccer Mom Van!
  
  We did a car spotting drive and caught a Bugatti Veyron in a normal neighborhood and it appeared to have been Kicked To The Curb By Read More »
- Disk Brake Squeal Fix – The Easy Way
  
  This is a short video on how to reduce brake noise from disk brakes. We used a product called “Disc Brake Quiet” Please support our channel Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »
- Very cool Camper
  
  This is a very cool camper. Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Pink Floyd Week 25 (Look mom, no teeth)
  
  This is a typical TN car, no teeth 🙂 Ok the grille teeth have not been installed yet but Pink Floyd will soon have teeth again. Read More »
- Aston Martin Snow Test
  
  This is crazy, an Aston Martin Snow Test. Read More »
- New 1950 Shop Truck Project
  
  We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »
- When you can not afford a real one
  
  We found this on Pintrest, for those who can not afford a real one 🙂 Read More »
- Pink Floyd Day 1
  
  Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- SEMA Day 2
  
  Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »
- Manually Shifting Your Automatic Transmission (Explained)
  
  This is a video on how to Manually Shift Your Automatic Transmission in a GMC or Chevy truck. Read More »