July 25, 2016 - Full Octane Garage | Full Octane Garage

Daily Archives: July 25, 2016

First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter

July 25, 2016 Banner, Metal Work

This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed in my glove 🙂

We were cutting up a 1988 Corvette Donor car that we needed the suspension to complete another project.

Read More

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- Carl’s Custom Cars Built The Buick Roadmaster
  
  I saw this car in person at SEMA 2015 and it was one awesome build. Congrats to being in the top 25 builds! Thanks to HotRod.com Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- 2017 Boca Raton Concours
  
  We took some pictures of our visit at the 2017 Boca Raton Concours. Read More »
- Bel Air off to a new home
  
  [nggallery id=94] Read More »
- This 1961 Kelly Coach Built Corvette
  
  This is a very cool coach built early 60 Corvette and it has even a cooler story! Read More »
- Nissan Pathfinder Long term Review, An Owners Perspective
  
  Nissan Pathfinder Long term Review, An Owners Perspective Read More »
- Side Effects of Ethanol
  
  We know ethanol does some strange stuff to fuel systems but we did not think this is one of the expected side effects 🙂 Read More »
- How Much To Insure A New 2019 Ford GT ($500K Value)
  
  You now have an extra $500,000 and want to buy a 2019 Ford GT, you now ask how much is my insurance going to cost??? When Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- 1963 Corvette Split Window (Project Second Chance)
  
  Well it seems I am a gluten for punishment, I am back for my 4th build since 2012. At the end of each build I keep Read More »
- C7 is on order :)
  
  The new 2014 C7 is on order and will arrive soon! Read More »
- Full Octane Garage SHORT CUT featuring the 2016 Range Rover SVR
  
  Our SHORT CUT videos are brief “videos of opportunity” Today’s video features the new 2016 Range Rover SVR, Range Rover’s 550hp supercharged AWD SUV. Read More »
- Full Octane Garage Now Offers Corvette Replacement Chassis
  
  We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More »
- Week 29 Progress (WOW, it is looking Great!)
  
  WOW, week 29 and we can see light at the end of the tunnel. We got the interior mostly complete this week and I finished up Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Final Buffing Complete
  
  Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- 2017 Cars and Cigars event to support the Make a Wish Foundation!
  
  The Full Octane Garage was enlisted to help contact exotic and classic car owners who were willing to show their cars at the Cars and Cigars Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- Aston Martin Snow Test
  
  This is crazy, an Aston Martin Snow Test. Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- Project GMC LS-Z57 – Day 4 Tear Down – Mar 16, 2017
  
  We completed removing all of the parts today that we plan to use and the parts have been delivered to media blast. Now the week or Read More »

July 2016

M T W T F S S

« Jun Aug »

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31