Categories
-
Facebook
Archives
-
Recent Posts
-
1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More » -
Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More » -
Engine and Trans mocked up in Project 50 Five Window
We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More » -
Pink Floyd – Week 22
Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More » -
The NewTrailer Build Is Complete
The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More » -
Pink Floyd has Glass
Now that the windshield is installed it is really starting to look like a car again! [nggallery id=67] Read More » -
Floyd – Week 3 – The car formally known as Pink Floyd
Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More » -
Project Z57 GMC Chassis from RR Frames has arrived
The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More » -
ICT Billet A/C Bracket Install & Review 551494-3
We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More » -
A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More » -
Eastwood Brake Tube Flaring Tool Review (Item #25304)
This is a non-sponsored review of the Eastwood Brake Tube Flaring Tool (Item #25304). This is the firs time we used the tool and it is Read More » -
Project 63 Engine Bay Refresh
I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More » -
How To Park A Jaguar XKRS
How To Park A Jaguar XKRS (with no help from your friends) Read More » -
Very Cool Right Hand Drive 58 Corvette
This is a very nicely done 58. With the custom right hand drive it looks like he must be in Australia or New Zealand. Read More » -
1950 Chevy Five Window Progress Update 01/15/2017
Here is a quick walk around video of the progress on our 1950 Chevy Truck Restorod project as of 1/15/17. Read More » -
Stacey David’s Gearz TV Set Tour
The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More » -
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
Project 63 gets primer
Project 63 got some primer this weekend. Read More » -
Pink Floyd gets some BLING
Pink Floyd started getting some BLING this week. The chrome has started arriving back from being redone so on it goes. We also finished the bulk Read More » -
2016 October Wilson County Bank Car Show & Fall Fest
Here are some pictures of the great cars that showed up for the 2016 October Wilson County Bank Car Show & Fall Fest. There were 474 cars Read More » -
1950 Chevy Truck F-Body Manifold Modification For LS
It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More » -
Harbor Freight One Man Brake Bleeder Product Review
This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More » -
Cancel Save changes Only $363.00 Per Year To Insure My Porsche 911
Do not let the cost of insurance get in the way of buying your DREAM CAR! You will be surprised to find out how inexpensive it Read More » -
2014 Corvette Delivery Day
[nggallery id=96] Read More » -
Removing the CAB from the latest 1950 Chevy truck project
A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More » -
Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More » -
1960 Corvette Soda Blasting and Paint Stripping Process
This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More » -
Men’s Room Sink
We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More » -
Project GMC LS-Z57 – Day 4 Tear Down – Mar 16, 2017
We completed removing all of the parts today that we plan to use and the parts have been delivered to media blast. Now the week or Read More » -
WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More »
-
February 2026 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28




