Categories
-
Facebook
Archives
-
Recent Posts
-
Retrofit Modern Gauges in 1950 Chevy Truck
We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More » -
Corvette Montage
-
DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More » -
New Front SuspensionTest Fit
We did a test fit on the new front suspension test fit tonight. Over all it went in very easy, have a few items to work Read More » -
Project 63 week 3 – Tunnel Repair
Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More » -
Harbor Freight One Man Brake Bleeder Product Review
This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More » -
Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More » -
Project 63 Engine Bay Refresh
I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More » -
UnderCover Bed Cover for your GMC Truck
The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Read More » -
Which Cost More To Insure (Toyota Prius or Porsche Cayenne)
Which Cost More To Insure (Toyota Prius or Cayenne) This is a quick video to show you Insurance costs are not always what you assume. We Read More » -
Project 63 – 4/28 Progress
I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More » -
Project LS-56 has begun – 56 Corvette
Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More » -
Ardmore TN Car Show 2016
The Full Octane Garage attended the Armore Car Show in Ardmore, TN. Friendly people, beautiful cars and Mildreds for lunch! Thanks for having us , Ardmore! Read More » -
Pink Floyd Day 14
Made some more progress media blasting today. [nggallery id=34] Read More » -
The DJI Phantom4 , a Visual Introduction
As the Full Octane Garage continues our quest to improve our quality and content, we bring you, our wonderful viewers, a sample of content to come Read More » -
The New 1988 Corvette Donor Car Has Arrived
If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More » -
Floyd – NOW IN PRIMER
We finally got the car in primer today. My makeshift paint booth worked great, nice cross flow and no dust in the primer. I used 5 Read More » -
Picked up a LS 5.3 and 4L60E trans today
We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More » -
Insite from Jessie James
Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More » -
Project Pink Floyd – Week 6 Progress Update
Week number 6 has been a little slow. I have been waiting on parts to complete the rockers. We also got the motor uncrated and on Read More » -
The 2019 Jaguar I-Pace… Your Luxury Tesla Alternative?
Thanks to Craig and Ronnie at Jaguar Nashville, The Full Octane Garage got to spend some quality time in Jaguar’s 1st EV, the I-Pace. Is it Read More » -
1931 Auburn Overheating
The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More » -
1954 MGTF 1500 For Sale
1954 MGTF 1500. This is a beautiful car and though it is now a TF 1500 it is not numbers matching car. The car has a Read More » -
The Redneck Spin Chair
This would be a crazy ride, not sure I could handle it! Read More » -
Project 57 Has Arrived
It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More » -
Project 63 – 5/5 Progress Update
We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More » -
WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More » -
Project 63 got some color today!
Project 63 got some color today! Pictures of Dennis doing the final shooting. Read More » -
Floyd Gets a New Power Plant and Suspension
We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More » -
SOLD – 1950 Chevy 3100 5 Window Restomod Truck
Up for sale is a 1950 Chevy five window truck, this is a fresh restoration with lots of new metal. This truck drives awesome! Read More »
-
November 2025 M T W T F S S « Dec 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30




