Porsche 911 Archives - Full Octane Garage

Category Archives: Porsche 911

Cancel Save changes Only $363.00 Per Year To Insure My Porsche 911

November 25, 2018 Banner, Porsche, Porsche 911, Product Review

Do not let the cost of insurance get in the way of buying your DREAM CAR! You will be surprised to find out how inexpensive it is to insure a collector car.

These estimates were run with a $500 deducible.

http://fulloctaneinsurance.com
615-669-4438

Porsche 911 DIY Wheel Spacer Installation (Wide Body)

October 28, 2018 Banner, How To, Porsche, Porsche 911

This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the rear and 7mm spacers to the front.

Rear 15mm
https://www.pelicanparts.com/More_Info/HR30957161SW.htm?pn=HR-30957161-SW&gclid=CjwKCAjwvNXeBRAjEiwAjqYhFlKCBwC1l7Tb4WbRm1ZGRi4sk8c1-JkVEwQI_OPAK640R3U6RCFjIxoCdjQQAvD_BwE&KeepHeader=Y&ByPassCat=Y&null=https%3A%2F%2Fwww.pelicanparts.com%2Fsupport%2FSuperTech-no-catalog.htm

DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)

October 17, 2018 Banner, How To, Porsche, Porsche 911, Product Review

This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Fister and or Gundo Hack).

As part of this video we have included a Porsche 911 Exhaust 101 along with a detailed explanation on how the Full Octane Mod (AKA Fister and or Gundo Hack) works.

We have included step by step instructions, feel free to ask us any questions.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- The NewTrailer Build Is Complete
  
  The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More »
- Insite from Jessie James
  
  Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More »
- Welcome to the Full Octane Garage!
  
  Welcome to the Full Octane Garage! We are going to have some FULL OCTANE FUN! Read More »
- Pink Floyd Before
  
  In 2012 I decided I wanted to restore a C1 corvette for my 50th birthday so my journey began 🙂 I looked on craigs list, ebay Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- SEMA Day 2
  
  Read More »
- Project Z57 (1957 GMC) Back From Media Blast
  
  We picked up the truck from media blast today and to our surprise most of the body was in really nice shape. Well at least the Read More »
- SEMA Day 1 (Shelby Daytona #1)
  
  (Shelby Daytona #1) It was very exciting to see $20 Million dollars of history sitting in front of you! Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Pink Floyd Week 23
  
  We made great progress during week 23 of the build. The A/C, radiator and almost all of the engine bay is complete. It seems like this Read More »
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- 50 Chevy Truck Body Progress
  
  We finally got back to work on the 1950 Chevy 5 window truck project this week. Today Dennis spent a bunch of time prepping the majority Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- 1950 Chevy Truck F-Body Manifold Modification For LS
  
  It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- 2017 Outtakes & Bloopers. The Fast and the Funniest!
  
  Join us as we recap our 1st full year on YouTube as Full Octane Garage! 180+ videos, 1000+ subs some new cars, new events and new Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- Manually Shifting Your Automatic Transmission (Explained)
  
  This is a video on how to Manually Shift Your Automatic Transmission in a GMC or Chevy truck. Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »