Pink Floyd Week 19 Progress (Color is looking GREAT!)

August 16, 2012 Uncategorized

Week 19 continues to bring a lot of progress. We started color sanding the body and it is looking GREAT so far! We have been working hard putting the chassis back together and we are down to the last few items before the body can be installed back on the frame.

[nggallery id=57]

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Looking More Like A Car!
  
  We finally got all of the body parts back on the car so it is looking more like a real car now. Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- Pink Floyd Week 25 (Look mom, no teeth)
  
  This is a typical TN car, no teeth 🙂 Ok the grille teeth have not been installed yet but Pink Floyd will soon have teeth again. Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- This 1961 Kelly Coach Built Corvette
  
  This is a very cool coach built early 60 Corvette and it has even a cooler story! Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Hank Hill proves WD40 is the answer to all problems
  
  Read More »
- Corvette Montage
  
  Read More »
- Pink Floyd Gets Some Teeth
  
  Pink Floyd no longer looks like he is from TN, he now has teeth in his new Grille. We also go the back bumpers installed, now Read More »
- Side Effects of Ethanol
  
  We know ethanol does some strange stuff to fuel systems but we did not think this is one of the expected side effects 🙂 Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- 2017 Cars and Cigars event to support the Make a Wish Foundation!
  
  The Full Octane Garage was enlisted to help contact exotic and classic car owners who were willing to show their cars at the Cars and Cigars Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Why is the LS so good?
  
  Thanks to /Drive for this video. Read More »
- WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
  
  This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More »
- Pink Floyd Has A Body!
  
  The body and frame finally came back together as one today. The only thing left of Pink Floyd is the old hood hanging on the wall Read More »
- Pink Floyd – Week 20 (Body meets Chassis)
  
  Finally week 20 is here and the body is ready to put back on the chassis. [nggallery id=58] Read More »
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »
- 1950 Chevy Truck Paint Progress
  
  We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More »
- A Day at the Porsche Driving Experience
  
  The Full Octane Garage was invited down to Porsche North American Headquarters in Atlanta by Hagerty’s for a special meet and greet and to check out Read More »
- Manually Shifting Your Automatic Transmission (Explained)
  
  This is a video on how to Manually Shift Your Automatic Transmission in a GMC or Chevy truck. Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Project GMC LS-Z57 – Day 4 Tear Down – Mar 16, 2017
  
  We completed removing all of the parts today that we plan to use and the parts have been delivered to media blast. Now the week or Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »