88 Corvette Engine Removal | Full Octane Garage

88 Corvette Engine Removal

February 28, 2016 1957 GMC Project LS-Z57, Banner

We made more progress on tearing down the 88 Corvette donor car.

This top was cut off and sold yesterday and this was the progression of the engine removal today. The engine is finally out. Thanks to my friend Allen Pezo for some needed help!

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd’s New Jorney
  
  Pink Floyd begins it’s New Journey from Texas to Brentwood Tn. We are looking forward to the arrival. Read More »
- A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
  
  Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- 2017 Auburn Cord Duesenberg Citrus Meet
  
  2017 Auburn Cord Duesenberg Citrus Meet & Boca Raton Concours d’elegance Read More »
- New Front SuspensionTest Fit
  
  We did a test fit on the new front suspension test fit tonight. Over all it went in very easy, have a few items to work Read More »
- Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
  
  We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- 2300 Miles in a Jaguar with no Top, One Man’s Epic Journey
  
  Our friend Paul took the time to sit down with the Full Octane Garage and share his incredible 2300 mile journey to collect a replica of Read More »
- 1955 MG TF New Top Project
  
  After 2 years of having a new rag top in the box we finally got around to installing the new top. It looks so much nicer Read More »
- For Those Who Need Something Easier To Park and Drive
  
  Read More »
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- Pink Floyd Day 6
  
  Day number 6 ends with a good amount of progress. We removed the doors and just about finished up under the dash, just have the pedals Read More »
- Tesla Model X vs Model S P90D Ludicrous Husband vs Wife Drag Racing 1/4 Mile Showdown
  
  This was interesting. Thanks to Drag Times for sharing! Read More »
- Regen Mode on My 2015 GMC Duramax REALLY STINKS!
  
  The Regen Mode on my 2015 GMC Duramax REALLY STINKS! The truck has a little over 20k miles and I have always noticed a diesel smell Read More »
- Project 63 got some color today!
  
  Project 63 got some color today! Pictures of Dennis doing the final shooting. Read More »
- Looking More Like A Car!
  
  We finally got all of the body parts back on the car so it is looking more like a real car now. Read More »
- Installing Heating and Cooling in my Garage!
  
  FULL OCTANE your GARAGE! In this video we will discuss the various options for heating and cooling your garage and then a more detailed discussion of Read More »
- Full Octane Garage Now Offers Corvette Replacement Chassis
  
  We are now the proud Nashville distributor for Chassis Concepts replacement Corvette Chassis to fit C1, C2 and C3 Corvettes. Our complete rolling chassis starts in Read More »
- Putting RUST 911 to the test!
  
  As part of our product testing we decided to put RUST 911 to the test and here is our Rust 911 review! Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Project 5 Window Chassis Update
  
  We made some nice progress on the chassis of the 1950 Chevy five window truck. We cleaned up and reinforced a bunch of the welds and Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- Aston Martin Snow Test
  
  This is crazy, an Aston Martin Snow Test. Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- 1931 Auburn – Getting ready for Atlanta Concours
  
  For the past month we have been hard at work getting the 1931 Auburn ready for the Atlanta Concours. We started by cleaned and stripping any Read More »

August 2026

M T W T F S S

« Dec

1 2

3 4 5 6 7 8 9

10 11 12 13 14 15 16

17 18 19 20 21 22 23

24 25 26 27 28 29 30

31