New 1950 Shop Truck Project | Full Octane Garage

New 1950 Shop Truck Project

January 28, 2016 1950 Chevy Truck, Banner

We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very much like this fantastic looking 50’s Chevy 3100.

We came across a partially finished project that has some good bones and this may be the future project truck if it all works out.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Carl’s Custom Cars Built The Buick Roadmaster
  
  I saw this car in person at SEMA 2015 and it was one awesome build. Congrats to being in the top 25 builds! Thanks to HotRod.com Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Gas Tank Leak? Red Kote Gas Tank Sealer Review & Application
  
  We shot a fairly detailed video of building a new fuel tank and showing a Red Kote Fuel Tank Sealer Review & Application process. Read More »
- Can a Spark Plug Break Glass?
  
  More fun from youetube! This is pretty crazy, who is going to try this first? Read More »
- Side Effects of Ethanol
  
  We know ethanol does some strange stuff to fuel systems but we did not think this is one of the expected side effects 🙂 Read More »
- The 2019 Jaguar I-Pace… Your Luxury Tesla Alternative?
  
  Thanks to Craig and Ronnie at Jaguar Nashville, The Full Octane Garage got to spend some quality time in Jaguar’s 1st EV, the I-Pace. Is it Read More »
- A Small Bit Of Bad News :( (but it is not too bad)
  
  While cleaning out the rocker area I uncovered some severely rusted metal under the fiberglass, who would have known there would be metal in a fiberglass Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »
- A Little noise leads to a 5 speed and Engine Rebuild :)
  
  Well, a little noise that I could not diagnose leads to a 5 speed and Engine Rebuild 🙂 While the new 5 speed is on it’s way I decided Read More »
- Pink Floyd Day 14
  
  Made some more progress media blasting today. [nggallery id=34] Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- 1955 MG TF is complete
  
  The 1955 MG TF restoration is now complete. [nggallery id=12] Read More »
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Which Cost More To Insure (Toyota Prius or Porsche Cayenne)
  
  Which Cost More To Insure (Toyota Prius or Cayenne) This is a quick video to show you Insurance costs are not always what you assume. We Read More »
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- 2015 Audi S5 Cabriolet Review An Owner’s Perspective
  
  2015 Audi S5 Cabriolet Review An Owner’s Perspective Read More »
- New 1950 Shop Truck Project
  
  We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More »
- Pink Floyd Day 4
  
  It was a short night tonight. We were able to remove the parking brake, hood release and dash cluster. I also put some stuff on Craig Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- 10 Car Logos You Probably Never Knew The Meaning Of!
  
  Thanks to Car Throttle for this clip. Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- WE BUY PROJECT CARS & TRUCKS
  
  Do you know anyone who has a project they started and cannot quite get it finished? Have a project you are tired of and are looking Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »

November 2026

M T W T F S S

« Dec

1

2 3 4 5 6 7 8

9 10 11 12 13 14 15

16 17 18 19 20 21 22

23 24 25 26 27 28 29

30