November 17, 2016 - Full Octane Garage

Daily Archives: November 17, 2016

DIY Steering Wheel Restoration on a budget with professional results!

November 17, 2016 Banner, C1 Corvette, How To

Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short video outlining the process which delivered outstanding results.

We used a product called QuickSteel Epoxy Putty to fill the cracks and damaged areas. We then used a high build primer and shot the wheel with PPG Acrylic Enamel paint.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- Tesla P90D Test Drive (Ludicrous mode)
  
  We had a chance to take a Tesla P90D for a quick Test Drive and it had (Ludicrous mode). What a great car with exciting power! Read More »
- 2015 SEMA Battle Of The Builders
  
  Full Octane Garage was very excited to have our 1956 Corvette Resto-Mod (Project LS-56) accepted in the 2015 SEMA Battle Of The Builders competition. It was Read More »
- 1950 Chevy Truck Body Install
  
  We finally mounted the body on the frame of the 1950 Chevy Truck. Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- 70 Exotic Cars and 1 Great Cause!
  
  16The Full Octane Garage participated in the 2018 Team Annie Rose Leukemia Foundation Poker Run with an amazing collection of over 70 exotic cars. Read More »
- Pink Flode is no longer TOPLESS!
  
  Pink Floyd is no longer TOPLESS or TOOTHLESS 🙂 We got the op mounted today and we started installing the carpet and seats. [nggallery id=69] Read More »
- Final Buffing Complete
  
  Dennis came by this week and did the final buffing and put a coat of Zaino 🙂 It is looking GREAT! [nggallery id=68] Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- You know you are a Car Guy if… episode 2
  
  2nd in the series of “You know you are a Car Guy if…” This is a fun series on how crazy car guys can get. This Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- 1931 Auburn at the 2016 Atlanta Concours
  
  We had a fun time with the 1931 Auburn at the 2016 Atlanta Concours last weekend. We wanted to share a few pictures and we will Read More »
- The New 1988 Corvette Donor Car Has Arrived
  
  If you have been following us you will recall we have been planning a build for our 1957 GMC truck project. The truck has been in Read More »
- LOOK, it’s an engine! Pink Floyd now has an Engine and 5 speed
  
  Pink Floyd finally got an engine and 5 speed installed today. It will not belong before it gets a body! [nggallery id=56] Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- Looking More Like A Car!
  
  We finally got all of the body parts back on the car so it is looking more like a real car now. Read More »
- Week 29 Progress (WOW, it is looking Great!)
  
  WOW, week 29 and we can see light at the end of the tunnel. We got the interior mostly complete this week and I finished up Read More »
- TOP SECRET Lane Motor Museum Tour (Behind the scenes)
  
  TOP SECRET Lane Motor Museum Tour (Behind the scenes + Basement Tour including the Nissan Heritage Collection). OK, not so TOP SECRET but the basement and Read More »
- Cool 62 Corvette Restomod
  
  This is a cool car done by my friend Darrin Woods! And the COOL garage is the Vintage Classic Garage in Franklin TN. [nggallery id=81] Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile
  
  This is pretty impressive. The Tesla Model S P100D Ludicrous vs Lamborghini Huracan 1/4 Mile Drag Racing Battle at PBIR. Video from Drag Times. Read More »
- 2300 Miles in a Jaguar with no Top, One Man’s Epic Journey
  
  Our friend Paul took the time to sit down with the Full Octane Garage and share his incredible 2300 mile journey to collect a replica of Read More »
- Project GMC LS-Z57 – Day 2 Tear Down – Mar 14, 2017
  
  We made a little more progress on the tear down tonight. So far no surprises, no rust and almost all of the bolts and screws are Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »