Removing and Storing the Freedom Roof Panels for the Jeep Wrangler Unlimited | Full Octane Garage

Removing and Storing the Freedom Roof Panels for the Jeep Wrangler Unlimited

April 18, 2018 Banner, How To, Product Review

Today the Full Octane Garage will cover, with the help of our good friend Elvis from the Golden Drive and our fellow Jeep enthusiast, Zlatko, how to remove and store the Freedom Panels on a 2017 Jeep Wrangler Unlimited Sport!

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Gas Tank Leak? Red Kote Gas Tank Sealer Review & Application
  
  We shot a fairly detailed video of building a new fuel tank and showing a Red Kote Fuel Tank Sealer Review & Application process. Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Project 63 – The new addition, a 1963 Split Window
  
  [nggallery id=75] Read More »
- A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
  
  Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- Project 63 Paint Progress
  
  The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding Read More »
- LOOK, it’s an engine! Pink Floyd now has an Engine and 5 speed
  
  Pink Floyd finally got an engine and 5 speed installed today. It will not belong before it gets a body! [nggallery id=56] Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- 2014 Corvette next to 1960 Corvette
  
  All I can say is WOW! A friend from the GM plant had a pre-production 2014 C7 Corvette out at Cars and Coffee today. We get Read More »
- A Week with the 2017 Land Rover Discovery
  
  Jaguar Nashville loaned a new Land Rover Discovery to us for a week while the Jaguar XKRS was in for service. We took this opportunity to Read More »
- 1950 Five Window Update
  
  1950 Five Window Update picture Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- Pink Floyd Day 13
  
  Day 13 started the Media Blasting with baking soda. It is quite messy but very cool! [nggallery id=33] Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- Floyd – Week 12 Progress Update
  
  We have now started week 12 and this is body work week. We are filling and smoothing the surfaces and generally making a big dusty mess. Read More »
- Floyd – Week 7 Progress Update
  
  Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More »
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- Pink Floyd Day 1
  
  Sunday March 25th 2012 began the Pink Floyd restoration and face lift. Debby and I worked most of the day setting up a staging area along Read More »
- Project GMC LS-Z57 – Day 3 Tear Down – Mar 15, 2017
  
  Well we are on Day number 3 (I should say night number 3) of Project GMC LS-Z57 tear down. My friend Allen Pezo came by last Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Fresh 6.0 Aluminum and a Fresh 5.3 Arrived
  
  I have been on the hunt for two LS motors for my two truck projects. A friend swapped out his freshly built 5.3 for a 6.0 Read More »
- MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN
  
  MANSORY FULL CARBON FIBER MERCEDES SLR MCLAREN COURTESY OF VELOCITY MOTORCARS! Read More »
- Project GMC LS-Z57 – Day 5 Tear Down – Mar 17, 2017
  
  OK, it is now day 5 and we have completed the final tear down. The only parts left now are the parts we will not be Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »
- 1960 Corvette Top Up getting ready for a Sunday Drive.
  
  [nggallery id=74] Read More »
- Duke Engines – Increasing The Efficiency of the Internal Combustion Engine
  
  This looks pretty interesting, would be cool to see it in a real car! Read More »

April 2026

M T W T F S S

« Dec

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30