Project 63 SWC is Finished

August 16, 2013 C2 Corvette, Project 63 SWC

Project 63 is finally finished. The new trailer came in yesterday so life is good!

[nggallery id=90]
[nggallery id=86][nggallery id=75][nggallery id=76][nggallery id=77][nggallery id=78][nggallery id=79][nggallery id=80][nggallery id=85][nggallery id=84]

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- Floyd – Week 5 Progress Update
  
  Week 5 has brought a lot of progress. I fired up the sand blast cabinet and have started working on the smaller metal items. I also Read More »
- Floyd Gets a New Power Plant and Suspension
  
  We finally made some driveability decisions so we decided to replace the old king pin front end with a new Jim Meyer Racing coil over with Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- 88 Corvette Engine Removal
  
  We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More »
- 5 Things I Hate About My GMC Diesel Denali
  
  This is a video that talks about the top 5 Things I hate about my GMC Diesel Denali after 36k miles of ownership. Read More »
- Frame Assembly and Parts Painting Begins
  
  Now that the body is almost ready for paint I had to finish up the frame repair and paint work and get it out of the Read More »
- Speedway Motors Front Disk Brake Kit Install & Review
  
  We decided to try out the Speedway Motors Front Disk Brake Kit so we put together an installation & Review video. This is their part number Read More »
- Floyd – Week 15 (Frame repair COMPLETE)
  
  As week 15 comes to a close we made great progress on the rust repair in the frame. There was a little more damage than I Read More »
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- Project 63 – Interior Progress Update 5/13/13
  
  I am finally making good progress on the interior. I was able to get the Second Skin heat mat down and I got the whole rear compartment other Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- 2017 Outtakes & Bloopers. The Fast and the Funniest!
  
  Join us as we recap our 1st full year on YouTube as Full Octane Garage! 180+ videos, 1000+ subs some new cars, new events and new Read More »
- Frame Work Continues
  
  We ran into another small snag this week. After we got the frame back form blasting I noticed a few areas where rust holes had begun. Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- Project LS-56 1956 C1 Corvette Restomod
  
  Read More »
- Pink Floyd Day 13
  
  Day 13 started the Media Blasting with baking soda. It is quite messy but very cool! [nggallery id=33] Read More »
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- Pink Floyd – Week 16 progress
  
  Week 16 has brought some good progress. Most of the body is ready for paint. We completed painting the underside, engine bay, interior and trunk in Read More »
- Tesla Model X vs Model S P90D Ludicrous Husband vs Wife Drag Racing 1/4 Mile Showdown
  
  This was interesting. Thanks to Drag Times for sharing! Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Pink Floyd Is Alive!
  
  We finally took the car for the first drive! We now have 45 miles on it and after fighting several leaks we think it has stabilized. Read More »
- 1931 Auburn at the 2016 Atlanta Concours
  
  We had a fun time with the 1931 Auburn at the 2016 Atlanta Concours last weekend. We wanted to share a few pictures and we will Read More »
- Chassis Work Begins (Week 13)
  
  Week 13 was productive. The first round of block sanding is complete and the car is now in the second round of primer. We also finished Read More »
- How To Park A Jaguar XKRS
  
  How To Park A Jaguar XKRS (with no help from your friends) Read More »
- 1955 MG TF New Top Project
  
  After 2 years of having a new rag top in the box we finally got around to installing the new top. It looks so much nicer Read More »
- Project 5 Window Body Update
  
  We just got the body back from media blasting and to our surprise it looks pretty good. We need to replace some cab corners and fix Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »