February 7, 2018 - Full Octane Garage

Daily Archives: February 7, 2018

UnderCover Bed Cover for your GMC Truck

February 7, 2018 Banner, GMC Truck Stuff, How To, Product Review

The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Outtakes….

If you plan on buying this bed cover and you liked our video please consider supporting our channel by using the following purchase link and it will include FREE SHIPPING

https://amzn.to/2GmteHz

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- Vegas Rat Rods (WELDER-UP)
  
  These are some pictures we took at WELDER-UP HQ in Las Vegas (Home of the Vegas Rat Rods Show! Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- A Small Bit Of Bad News :( (but it is not too bad)
  
  While cleaning out the rocker area I uncovered some severely rusted metal under the fiberglass, who would have known there would be metal in a fiberglass Read More »
- ICT Billet A/C Bracket Install & Review 551494-3
  
  We bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine. The kit was great but unfortunately I did not Read More »
- Project Pink Floyd Day 15
  
  More fun with Baking Soda 🙂 We are doing a DIY soda blasting project using an Eastwood Dual Blast unit. This project took about 600 lbs Read More »
- Pink Floyd gets some BLING
  
  Pink Floyd started getting some BLING this week. The chrome has started arriving back from being redone so on it goes. We also finished the bulk Read More »
- Bugatti Veyron Gets Kicked To The Curb By Soccer Mom Van!
  
  We did a car spotting drive and caught a Bugatti Veyron in a normal neighborhood and it appeared to have been Kicked To The Curb By Read More »
- You know you are a Car Guy if…episode 3
  
  3rd in the series “You know you are a Car Guy if…” Read More »
- GMC/Chevy Hide Or Reveal Radio Favorites (Explained)
  
  This video will show you how to Hide Or Reveal your radio favorites for the GM Intellilink Infotainment System. Read More »
- 1950 Chevy Truck F-Body Manifold Modification For LS
  
  It was time to start thinking about the exhaust manifold for the LS 5.3 we dropped into our 1950 Chevy Truck project. The frame is very Read More »
- The NewTrailer Build Is Complete
  
  The new trailer build was completed today, now I just waiting on it leaving Ga and arriving in TN! Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Project 63 gets primer
  
  Project 63 got some primer this weekend. Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- A Day at the Porsche Driving Experience
  
  The Full Octane Garage was invited down to Porsche North American Headquarters in Atlanta by Hagerty’s for a special meet and greet and to check out Read More »
- You know you are a Car Guy if… episode 2
  
  2nd in the series of “You know you are a Car Guy if…” This is a fun series on how crazy car guys can get. This Read More »
- Project 63 got some color today!
  
  Project 63 got some color today! Pictures of Dennis doing the final shooting. Read More »
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- The Making Of A Pallet Wood Wall In The Full Octane Garage
  
  This is a little bit of information on Garage decorating and the creation of cool accent walls using old pallet wood. This is a project we started Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- Initial Engine Start Up
  
  Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
- Putting RUST 911 to the test!
  
  As part of our product testing we decided to put RUST 911 to the test and here is our Rust 911 review! Read More »
- Pink Floyd has Glass
  
  Now that the windshield is installed it is really starting to look like a car again! [nggallery id=67] Read More »
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »
- Paul Walker Porsche Blames Him For His Own Death
  
  Just in from TMZ! Paul Walker Porsche Blames Him For His Own Death http://www.tmz.com/2015/11/16/paul-walker-porsche-lawsuit-crash/ Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »