July 2016 - Full Octane Garage | Full Octane Garage

Monthly Archives: July 2016

First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter

July 25, 2016 Banner, Metal Work

This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed in my glove 🙂

We were cutting up a 1988 Corvette Donor car that we needed the suspension to complete another project.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Initial Engine Start Up
  
  Here are a couple of clips of the initial engine start up. 1st Attempt to Start Disaster, starter stuck engaged 🙂 2nd Attempt at Engine Start Read More »
- Project 63 gets an engine
  
  Well it is getting close now, we got the engine back from the machine shop this week so this weekend project 63 got an engine and Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- 1950 Chevy Five Window Progress Update 03/20/2017
  
  We are finally back on the 50 Five Window project again and have made some good progress. Over the weekend we had to finish up painting Read More »
- Pink Floyd gets some BLING
  
  Pink Floyd started getting some BLING this week. The chrome has started arriving back from being redone so on it goes. We also finished the bulk Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Very cool Camper
  
  This is a very cool camper. Read More »
- What’s New At The Full Octane Garage (12/2/18 Update)
  
  Full Octane Garage Project Updates (1933 Auburn is in paint) Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- Project Pink Floyd – The Doors Are On!
  
  I finally finished painting the last of the small parts including the door hinges. After the paint dried we got the doors hung so now the long process of body alignment comes Read More »
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- Floyd – Week 3 – The car formally known as Pink Floyd
  
  Week 3 has been more soda blasting. So far I have used 500 lbs of baking soda. I have decided to start going to weekly progress Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- Pink Floyd Has A Body!
  
  The body and frame finally came back together as one today. The only thing left of Pink Floyd is the old hood hanging on the wall Read More »
- Correcting that pesky Brake Squeal
  
  Read More »
- Harbor Freight One Man Brake Bleeder Product Review
  
  This is a review of a one man pneumatic brake bleeder from Harbor Freight. The results are surprising! We found a very similar unit on Amazon Read More »
- Project 57 Has Arrived
  
  It has been a long wait but the 1957 GMC arrived from California today. The body is in better shape than I had anticipated. Read More »
- Pink Floyd – Week 17 progress
  
  Week 17 has been busy. We started putting the frame back together. The new front suspension is now complete, the brake lines are plumbed and we are close Read More »
- Pink Floyd Week 26
  
  We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
- Bugatti Veyron Gets Kicked To The Curb By Soccer Mom Van!
  
  We did a car spotting drive and caught a Bugatti Veyron in a normal neighborhood and it appeared to have been Kicked To The Curb By Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- 1950 Chevy 5 Window Truck Project Update 6/18/17
  
  We have been making a little progress on the 50 Five Window. I am hoping just a few more nights and I will be able to Read More »
- For Those Who Need Something Easier To Park and Drive
  
  Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- 88 Corvette Engine Removal
  
  We made more progress on tearing down the 88 Corvette donor car. This top was cut off and sold yesterday and this was the progression of Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »