Project 63 Paint Progress | Full Octane Garage

Project 63 Paint Progress

June 28, 2013 Uncategorized

The paint is starting to look great! It is totally amazing at how bad you have to make the new lacquer paint look with the color sanding process before the final polishing can be done.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project 63 – Vintage Air update
  
  First we removed everything form the engine bay accept the engine and we repainted the engine and engine bay then we re-installed the new brake booster, master and radiator. We Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- For Those Who Need Something Easier To Park and Drive
  
  Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- Cancel Save changes Only $363.00 Per Year To Insure My Porsche 911
  
  Do not let the cost of insurance get in the way of buying your DREAM CAR! You will be surprised to find out how inexpensive it Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Checking out the 2016 Mclaren 570S at Nashville CarsnCoffee!
  
  A fellow car enthusiast shared his new McLaren 570S with us at Nashville Cars n Coffee! Thanks for bring it out, Billy! Read More »
- SEMA Day 3
  
  This place just keep going and going on for ever! It ROCKS! Read More »
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Pink Floyd Day 16 (FUN WITH STRIPPER)
  
  OK, get your mind out of the gutter, I meant paint stripper and not real strippers 🙂 I took today to work with chemical stripper to Read More »
- Porsche 911 DIY Wheel Spacer Installation (Wide Body)
  
  This is a video showing how easy it is to add a little attitude to your 911/997 Porsche Carrera S by adding 15mm spacers in the Read More »
- Black Vinyl Wrap for the new Corvette
  
  I decided to vinyl wrap the center section of the top and my first attempt was in a matt carbon fiber look. I tried it for a Read More »
- Project Pink Floyd – Week 6 Progress Update
  
  Week number 6 has been a little slow. I have been waiting on parts to complete the rockers. We also got the motor uncrated and on Read More »
- Jay Leno’s take on the 2016 Cadillac CTS-V
  
  Jay Leno’s take on the 2016 Cadillac CTS-V Read More »
- 1956 Bel Air 4 door Resto-Mod LS1 EFI 5.3/4L60E
  
  ————————————————– This is a very recent restoration, the body was stripped to bare metal and the car had very little rust. The front floor pans and Read More »
- DIY – $10.00 Porsche 911 Exhaust Mod (AKA Fister and Gundo Hack)
  
  This is a video showing you how to improve the sound of your 911 (997.1) Exhaust for under $10.00 with the Full Octane Exhaust Mod (AKA Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »
- Pink Floyd Day 3
  
  We made a lot of progress on day 3 of tear down. We finished up removing the bumpers, the trunk, rear deck lid and finished up Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- What does the inside of a Fuel Filter look like after 300,000 miles?
  
  For those of you who skimp out a little on maint you might think twice after seeing this 🙂 Credits to Chris Fix. Read More »
- 2017 Boca Raton Concours
  
  We took some pictures of our visit at the 2017 Boca Raton Concours. Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- Project 63 Vintage Air Arrived Today
  
  The UPS guy just dropped off some gifts, the Vintage Air Arrived for Project 63. [nggallery id=78] Read More »
- 5 MUST HAVE Accessories for your GMC Denali Sierra Pick Up!
  
  The Full Octane Garage presents the top 5 Accessories for the GMC Denali Sierra Pick Up! Read More »
- DIY Brake Lines Made Easy plus a REVIEW of the Eastwood Brake Tube Flaring Tool
  
  DIY Brake Lines using the Jegs UNIVERSAL BRAKE LINE KIT Item 555-63095 and the Jegs PROPORTIONING VALVE 555-63022. We used the Eastwood Brake Tube Flaring Tool Read More »
- Picked up a LS 5.3 and 4L60E trans today
  
  We picked up a complete LS 5.3 and 4L60E trans from a GMC truck today, I have plans to freshen it up and put in the 1950 Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »

May 2026

M T W T F S S

« Dec

1 2 3

4 5 6 7 8 9 10

11 12 13 14 15 16 17

18 19 20 21 22 23 24

25 26 27 28 29 30 31