A Week with the Jaguar XE

February 28, 2017 Banner, Product Review

The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put the new Jaguar thru its paces!

Thanks to Jaguar Nashville for the use of the new XE!

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- What’s New At The Full Octane Garage (12/2/18 Update)
  
  Full Octane Garage Project Updates (1933 Auburn is in paint) Read More »
- New 1950 Shop Truck Project
  
  We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More »
- Looking at a 911
  
  Looking at a 911 for a friend. [nggallery id=73] Read More »
- 1950 Chevy Truck Paint Progress
  
  We periodically do a few major projects in the Full Octane Garage. We are currently building a 1950 Chevy 5 window restomod truck and we wanted Read More »
- Runaway Peterbuilt
  
  This is pretty Scary Stuff Read More »
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- Project Z57 GMC Chassis from RR Frames has arrived
  
  The new custom built Chassis from RR Frames arrived for Project Z57 GMC last night. This is built to accept C4 Corvette suspension and running gear Read More »
- Retrofit Modern Gauges in 1950 Chevy Truck
  
  We decided to Retrofit Modern Gauges in our 1950 Chevy Truck project but it turned out to be a bit more complicated that we had anticipated. Read More »
- Pink Floyd’s New Jorney
  
  Pink Floyd begins it’s New Journey from Texas to Brentwood Tn. We are looking forward to the arrival. Read More »
- Pink Floyd Day 8
  
  Day number 8 was the magic day, the body has been separated from the chassis. My friends Ray and Carol along with my wife completed the Read More »
- Engine and Trans mocked up in Project 50 Five Window
  
  We finally got back to work on the truck tonight, managed to get the LS engine and 4L60E transmission mocked up on the chassis. Tomorrow’s project Read More »
- DIY Steering Wheel Restoration on a budget with professional results!
  
  Our 1960 C1 Corvette Steering Wheel was in bad shape so we decided to do a Steering Wheel Restoration on a budget. We made a short Read More »
- Removing the CAB from the latest 1950 Chevy truck project
  
  A little entertainment when we were using the heavy equipment to remove the CAB from the latest 1950 Chevy truck project. Read More »
- SOLD – 2007 Corvette Z06
  
  For sale is a VERY CLEAN 2007 Corvette Z06 Loaded 3LT package, Victory Red, two tone red/black seats, memory seating, heated seats, painted rear spoiler, 505 Read More »
- Insite from Jessie James
  
  Some people dislike him, some love him, say what you want but this post from Jessie James makes a lot of sense. ========================================== West Coast Choppers Read More »
- Pavers going down in dirty space (on a budget)
  
  Day 1 – For those of you who have been following us for a while know we have been using an area under a concrete porch Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Jay Leno on the new ZO6
  
  Jay Leno takes a close look at the new Corvette Z06. Read More »
- Pink Floyd Day 5
  
  It was another short night for Day 5 but we made great progress. The first item we removed was the gas tank. After that we were Read More »
- New 1957 GMC Shop Truck Project
  
  We got an opportunity to buy a 1957 GMC project truck from our family that has been in the family as far back as I can Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- 50 Chevy Truck Body Progress
  
  We finally got back to work on the 1950 Chevy 5 window truck project this week. Today Dennis spent a bunch of time prepping the majority Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- Pink Floyd Day 14
  
  Made some more progress media blasting today. [nggallery id=34] Read More »
- 2017 Boca Raton Concours
  
  We took some pictures of our visit at the 2017 Boca Raton Concours. Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- SOLD – 1956 Corvette Resto-mod $149,000.00
  
  Read More »
- The Welder & Plasma Cutter Arrived
  
  The Eastwood Welder & Plasma Cutter Arrived so we decided to video the un-boxing and set up. Read More »
- Making a little more progress!
  
  We made a little more progress on the assembly, had to send the cars off for a rebuild but they should only be gone for a week. Read More »