Eastwood Brake Tube Flaring Tool Review (Item #25304) | Full Octane Garage

Eastwood Brake Tube Flaring Tool Review (Item #25304)

December 22, 2016 1950 Chevy Truck, Banner, How To, Product Review

This is a non-sponsored review of the Eastwood Brake Tube Flaring Tool (Item #25304). This is the firs time we used the tool and it is worth every penny of the $189.99 price tag. This is a great tool for the DIY home mechanic or professional. Easy to use and almost fool proof.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Project 63 is ALIVE
  
  Well, last weekend we finally got to take Project 63 around the block a few times. Over the weekend we got the hood on and Dennis Read More »
- Music City Dream Cars New Showroom Celebration!
  
  Full Octane Garage attended the new showroom Celebration for Music City Dream Cars! Located just off of Armory Drive along side Titan Motoring. What a great Read More »
- Project GMC LS-Z57 – Day 4 Tear Down – Mar 16, 2017
  
  We completed removing all of the parts today that we plan to use and the parts have been delivered to media blast. Now the week or Read More »
- 1955 MG TF is complete
  
  The 1955 MG TF restoration is now complete. [nggallery id=12] Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- 1960 Corvette Soda Blasting and Paint Stripping Process
  
  This is a video on the soda blasting and paint stripping process on project Pink Floyd a 1960 C1 Corvette. Read More »
- The Redneck Spin Chair
  
  This would be a crazy ride, not sure I could handle it! Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- Trailer Rehab – FRP Trailer Wall Repair/Replacement – Part 1
  
  We created this video as a trailer rehab project on what needs to be done and can be done to an older enclosed trailer. This also Read More »
- Project LS-57 Project Update 9/23/18
  
  BEFORE: Read More »
- DIY Porsche Cayenne Key FOB Battery Replacement
  
  A key FOB Battery cost HOW MUCH! DIY Porsche Cayenne Key FOB Battery Replacement. You will be shocked at how much mark up Batteries Plus is Read More »
- Engineering Flow Chart
  
  I found this on Facebook and it was too cool to not post! Read More »
- New 1950 Shop Truck Project
  
  We are planning our next build and it is looking like it will be an early 50’s pickup and we would like it to look very Read More »
- Part 1- Foam Cannon Challenge Head to Head Test (Foam Off) Who loses the BET?
  
  We picked up two foam cannons and 2 different pressure washers and decided to do a shoot out challenge (and there was a small bet with Read More »
- Why is the LS so good?
  
  Thanks to /Drive for this video. Read More »
- 2016 October Wilson County Bank Car Show & Fall Fest
  
  Here are some pictures of the great cars that showed up for the 2016 October Wilson County Bank Car Show & Fall Fest. There were 474 cars Read More »
- Pink Floyd Day 9
  
  Day 9 is complete. We removed the engine and transmission and prepared the engine for the new owner to pick up tomorrow. [nggallery id=30] Read More »
- A Week with the Jaguar XE
  
  The Full Octane Garage pounced upon the opportunity to drive the new 2017 Jaguar XE 35t for the past week. Check it out as we put Read More »
- Project 63 Vintage Air Arrived Today
  
  The UPS guy just dropped off some gifts, the Vintage Air Arrived for Project 63. [nggallery id=78] Read More »
- Stacey David’s Gearz TV Set Tour
  
  The antique car club had an awesome tour at Stacey David’s Gears TV set. He was a great guy to spend time with, a true car Read More »
- Only in Tennessee
  
  Only in Tennessee, it sure does not look like he is walking on the track 🙂 Read More »
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- Raptor Bed Liner used as undercoating on a 1950 Chevy Truck (Raptor by U-POL )
  
  This is a video we put together on using Raptor by U-POL as an undercoating and underside finish for both drivers and show cars. This application Read More »
- GMC Sierra / Denali Automatic High Beams Explained
  
  Well, just when you think you knew everything… someone shows you something new. In this video FoG explains the function of the GMC automatic high beams. Read More »
- Pink Floyd Before
  
  In 2012 I decided I wanted to restore a C1 corvette for my 50th birthday so my journey began 🙂 I looked on craigs list, ebay Read More »
- Correcting that pesky Brake Squeal
  
  Read More »
- WeatherTech Mud Flaps For Your GMC Denali (Installation & Review)
  
  This video covers the Review & Installation of WeatherTech No-Drill Mud Flaps for a 2018 GMC Denali To purchase this product and support our page please Read More »
- Project 63 – 5/5 Progress Update
  
  We made some more progress this week The engine bay is mostly complete, got the master booster and brake cylinder installed, the air cleaner painted and Read More »
- 1950 Chevy Five Window Progress Update 01/15/2017
  
  Here is a quick walk around video of the progress on our 1950 Chevy Truck Restorod project as of 1/15/17. Read More »
- Nashville Cars and Coffee 1/21/17
  
  Nashville Cars and Coffee 1/21/17 Read More »

April 2026

M T W T F S S

« Dec

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30