Full Octane Gear

We will be producing a full line of Full Octane clothing which will change often.

Currently you may purchase our basic Full Octane Garage shirt in either of two designs for $29.95 each.

Please SUBSCRIBE AND FOLLOW US

Categories
Categories

Facebook

Archives
Archives

Recent Posts
- Pink Floyd Day 11
  
  On Day 11 Pink Floyd is starting to become a little less pink and purple. I started using a chemical stripper but it was taking way Read More »
- Men’s Room Sink
  
  We were out to brunch at the Hermitage Hotel in Nashville and I know it is hard to say a bathroom is cool but this one Read More »
- Project LS-56 has begun – 56 Corvette
  
  Well may latest project a 56 Corvette (Project LS-56) finally made it’s way into my garage tonight. The car has an after market performance chassis with Read More »
- 1931 Auburn Overheating
  
  The 1931 Auburn is a new addition to our collection and since it has arrived we have been chasing an issue with the 1931 8-98 Lycoming Read More »
- 1954 MGTF 1500 For Sale
  
  1954 MGTF 1500. This is a beautiful car and though it is now a TF 1500 it is not numbers matching car. The car has a Read More »
- Project 63 – 4/21 Progress
  
  We made some progress this week on Project 63. I was able to get the new rear pinion seal installed along with a new front diff Read More »
- ICT Billet High Mount Narrow Bay AC Bracket Review (LS1/LS2/LS3 or Vortec 5.3) Part #551352-3
  
  We had bought an ICT Billet A/C Bracket part# 551494-3 and installed iton a 5.3 Vortec LS engine but unfortunately I did not measure where my Read More »
- A “Cheap” Ferrari 550 Maranello (Strange Car Stories)
  
  Episode 2 of our Strange Car Stories segment. Ouch, a $50,000 Mistake! This is a story of an old friend finding a deal that was too Read More »
- Pink Floyd Week 26
  
  We made really good progress this week. We tackled some of the harder items this week such as the dash pad installation and the windshield frame Assembly. Read More »
- Project 63 Vintage Air Arrived Today
  
  The UPS guy just dropped off some gifts, the Vintage Air Arrived for Project 63. [nggallery id=78] Read More »
- Project 63 Engine Bay Refresh
  
  I am making progress on the engine bay refresh. It is getting close to the point I can start putting things back together 🙂 Don’t mind Read More »
- Project 63 week 3 – Tunnel Repair
  
  Well I am now in week 3 of Project 63 and there has been a lot going on. I started prepping for the Vintage Air install Read More »
- PupProtector Car Seat Cover Review
  
  At the Full Octane Garage, when we use a product and find that it may benefit our viewers, we like review it after running it thru Read More »
- You know you are a Car Guy if… episode 2
  
  2nd in the series of “You know you are a Car Guy if…” This is a fun series on how crazy car guys can get. This Read More »
- SEMA Day 1 (Shelby Daytona #1)
  
  (Shelby Daytona #1) It was very exciting to see $20 Million dollars of history sitting in front of you! Read More »
- Pink Floyd – Week 22
  
  Welcome to week 22 🙂 We made a lot of fabrication and re-assembly progress over the last week. We installed the new dual brake master system and finished Read More »
- Project GMC LS-Z57 – Day 1 Tear Down
  
  Tonight marks the beginning (Day 1) of the Project GMC LS-Z57 Tear Down. We were only able to work a few hours but made a pretty Read More »
- First Attempt Cutting Up the 1988 Corvette with the Eastwood Versa-Cut 60 Plasma Cutter
  
  This was our First Attempt with the Eastwood Plasma Cutter. You get to have a good laugh about mid way through when some hot sparks landed Read More »
- How Much To Insure A New 2019 Ford GT ($500K Value)
  
  You now have an extra $500,000 and want to buy a 2019 Ford GT, you now ask how much is my insurance going to cost??? When Read More »
- Tesla Model X vs Model S P90D Ludicrous Husband vs Wife Drag Racing 1/4 Mile Showdown
  
  This was interesting. Thanks to Drag Times for sharing! Read More »
- 2018 GMC Denali Sierra 1500 Review, An Owners Perspective. 4k
  
  The Full Octane Garage just purchased the new 2018 GMC Denali Sierra 1500 pick up with the 6.2L V8. Take a ride with us as we Read More »
- Floyd – Week 11 Progress Update
  
  WOW, I have taken about 4 weeks off from the build project. We took a cruise to Alaska and came back with a cold that was Read More »
- Pink Floyd Day 14
  
  Made some more progress media blasting today. [nggallery id=34] Read More »
- Project 63 – 4/28 Progress
  
  I made a good amount of progress on project 63 this weekend. After weeks of tear down and cleaning finally I am to the point of Read More »
- 1964 Chevy Truck with a Cummins Diesel
  
  This was a very cool truck we came across at a local show. He converted to a duel wheel with a Cummins diesel. Read More »
- Floyd – Week 7 Progress Update
  
  Week 7 was a slow progress week. I was waiting on parts to arrive to complete the rocker restoration and now the rockers and new chassis Read More »
- UnderCover Bed Cover for your GMC Truck
  
  The Full Octane Garage covers the unboxing, installation and operation of the UnderCover Bed Cover on a 2018 GMC 1500 Sierra. and …. Yes there are Read More »
- Floyd – Week 4 Progress Update
  
  Week 4 has been wrapping up the bulk of the soda blasting. I finally got the door hinges and door strikers removed. I had to grind Read More »
- Emerald Coast Cruizin 2016
  
  Join the Full Octane Garage as we head down to the Emerald Coast Cruizin Car show in Panama City! Read More »
- Pink Floyd Day 7
  
  Day number 7 was a short night. We finished up removing the last of the bumper brackets then I built the body dolly. I had to Read More »